A
AS
I don't know why I get this error now, as I'm pretty sure I was able to run
this image perfectly fine...but now when I try to install XPe, during
FBA(Installing components phase), I get the following error message :
"Exception: D:\Windows\system32\iasrecst.dll, DllRegisteryServer,
0xe06d7363 "
and then from CallEntryPointThread
" Exception: D:\Windows\system32\mmcndmgr.dll, DllRegisterServer, 0xc0000005
"
and then
fba.exe Application error
"The Instruction at 0x00e62521" referenced memory at 0x000000C", the memory
could not be written... Click on OK to terminate the program."
and after clicking OK the machine reboots...
In the fbalog.txt, I get the message
[FBAFixWindowsPathsInRegistry ] : Incorrect winDir: [D:\Windows] should be
[E:\Windows]
followed by error 0x7F messages...
Now I have one harddisk with multiple partitions of which the second one is
a XPe partition formatted with fat32 (Drive D). Partition 1 (Drive C: with
Win200)) and partition 3(Drive E: WinXP Pro).
My TD Dev. Settings are as follows
Bootdrive: C:\
Windows Folder : D:\windows
program files: D:\program files
Docs & settings: D:\documents and settings
bootarc path: multi(0)disk(0)rdisk(0)partition(2)
Any ideas as to what could be wrong..
Thanks,
Regards,
this image perfectly fine...but now when I try to install XPe, during
FBA(Installing components phase), I get the following error message :
"Exception: D:\Windows\system32\iasrecst.dll, DllRegisteryServer,
0xe06d7363 "
and then from CallEntryPointThread
" Exception: D:\Windows\system32\mmcndmgr.dll, DllRegisterServer, 0xc0000005
"
and then
fba.exe Application error
"The Instruction at 0x00e62521" referenced memory at 0x000000C", the memory
could not be written... Click on OK to terminate the program."
and after clicking OK the machine reboots...
In the fbalog.txt, I get the message
[FBAFixWindowsPathsInRegistry ] : Incorrect winDir: [D:\Windows] should be
[E:\Windows]
followed by error 0x7F messages...
Now I have one harddisk with multiple partitions of which the second one is
a XPe partition formatted with fat32 (Drive D). Partition 1 (Drive C: with
Win200)) and partition 3(Drive E: WinXP Pro).
My TD Dev. Settings are as follows
Bootdrive: C:\
Windows Folder : D:\windows
program files: D:\program files
Docs & settings: D:\documents and settings
bootarc path: multi(0)disk(0)rdisk(0)partition(2)
Any ideas as to what could be wrong..
Thanks,
Regards,