Driver Update ?

[Jumbo]

Hi all,
Older Compaq Notebook Presario 1694
Run Win 98se
I recently run WMDiag and here are some comments:
I try to locate an updated driver but cannot find it.
Can someone help.
Thanks
Philippe

DxDiag Notes
------------
Display Tab 1: Hardware-accelerated Direct3D 9 is not available because the
display driver does not support it. You may be able to get a newer driver
from the hardware manufacturer.
Display Devices
---------------
Card name: RAGE LT PRO AGP 2X (English)
Manufacturer: ATI Tech. - Enhanced
Chip type: Mach64LT
DAC type: Internal
Device Key: Enum\PCI\VEN_1002&DEV_4C42&SUBSYS_B11B0E11&REV_DC\000800
Display Memory: 8.0 MB
Current Mode: 1024 x 768 (24 bit)(optimal refresh rate)
Monitor: Default Monitor
Monitor Max Res:
Driver Name: macxw4.drv
Driver Version: 4.11.0001.2545 (English)
DDI Version: 6
Driver Attributes: Final Retail
Driver Date/Size: 1/28/1999 13:46:00, 266800 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: *vdd,*vflatd
Mini VDD: macxw4.vxd
Mini VDD Date: , 0 bytes
Device Identifier: {D7B71EE2-0F02-11CF-047E-1A9178C2C935}
Vendor ID: 0x1002
Device ID: 0x4C42
SubSys ID: 0xB11B0E11
Revision ID: 0x00DC
Revision ID: 0x00DC
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run

 

[Inglo]

Hi all,
Older Compaq Notebook Presario 1694
Run Win 98se
I recently run WMDiag and here are some comments:
I try to locate an updated driver but cannot find it.
Can someone help.
Thanks
Philippe

http://ati.com/support/driver.html

An updated, yet still probably 3 year old, driver isn't going to do you
much good.

 

[Jumbo]

Hi Inglo how are you, it's lunch time here 12:07 PM ...French Time and I
guess 3:07 AM in LA, Cali...
still need to find the old driver cause mine is damaged I guess...
better find one recent if some has it...
Thanks all
http://www.timeanddate.com/worldclock/full.html
Just for info the link above ^
http://www.timeanddate.com/worldclock/city.html?n=181
Mine is ^
Philippe ))

 

[Greg]

http://www.ati.com/support/products...rod=productsME98driver&submit.x=13&submit.y=7

This link takes you to the driver I use for this video chip. By the way DX9
is a waste on this machine, DX8.1 is the last one that works properly and
even then there are some power saving mode issues.

 

[Jumbo]

Hi Greg,
and thank you for the link and advice. I change DX to 8.1 and change ATI
drivers as well. Everything seems to work fine and ok .
Thank you for your help.
Philippe