disable checkdisk each bootup?

[Guest]

How do I stop checkdisk from running on the second partition of my sole
harddrive upon each bootup? I've already checked under Startup, Task
Scheduler, msconfig and registry (\...Current_User\...\Run;
\...Local_Machine\...\Run,RunOnce,RunOnceEx). Also, I've successfully run a
checkdisk on the partition via Local Disk Properties>Tools>Error-checking
which the system said required a bootup to perform.

 

[Wesley Vogel]

Check Disk runs on every boot.

Open a command prompt...
Start | Run | Type: cmd | Click OK |
Type or paste the following line:

chkntfs /d

Hit the Enter key.

Chkntfs displays or modifies the checking of disk at boot time.

The /d switch restores the machine to the default behavior; all drives are
checked at boot time and chkdsk is run on those that are dirty.

Autochk.exe is a version of Chkdsk that runs only before Windows XP
starts. Autochk runs in the following situations:

Autochk runs if you try to run Chkdsk on the boot volume.
Autochk runs if Chkdsk cannot gain exclusive use of the volume.
Autochk runs if the volume is flagged as dirty.

This can happen if the drive's dirty bit is set.
When a drive's dirty bit is set, autochk automatically
checks the volume for errors the next time the computer is restarted.

This will report whether the dirty bit is set.

Start | Run | Type: cmd | Click OK |
Type or paste the following line:

fsutil dirty query C:

Hit the Enter key.

Volume C: is not dirty
Volume C: is dirty

[[If a volume's dirty bit is set, this indicates that the file system may be
in an inconsistent state. The dirty bit can be set because the volume is
online and has outstanding changes, because changes were made to the volume
and the computer shutdown before the changes were committed to disk, or
because corruption was detected on the volume. If the dirty bit is set when
the computer restarts, chkdsk runs to verify the consistency of the volume.

Every time Windows XP starts, Autochk.exe is called by the Kernel to scan
all volumes to check if the volume dirty bit is set. If the dirty bit is
set, autochk performs an immediate chkdsk /f on that volume. Chkdsk /f
verifies file system integrity and attempts to fix any problems with the
volume.]]
-----

This will also report whether the dirty bit is set.

Start | Run | Type: cmd | Click OK |
Type or paste the following line:

chkntfs c:

Hit the Enter key.

C: is not dirty.
-----

If this is not the problem.....

Go here:
http://www.kellys-korner-xp.com/xp_tweaks.htm

Read the instructions at the top of the page.
Scroll down to:
82. Disable or Enable Check Disk Upon Boot
Click on Disable.
-----

Additional information...
Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your
computer
http://support.microsoft.com/kb/831426

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In

 

[Guest]

now this is help! thanks Wes!!

 

[Guest]

"Volume - c: is NOT Dirty" but "Volume - e: is Dirty"....next move? pls.

 

[Wesley Vogel]

Try running a full chkdsk on e:

1. In My Computer or Windows Explorer, right-click the drive you want to
check and then click Properties.
2. On the Tools tab, click Check Now.
3. Check both boxes:

* Automatically fix file system errors
* Scan for and attempt recovery of bad sectors

A message will popup.

[[The disk check could not be performed because the disk check utility needs
exclusive access to some Windows files on the disk. These files can be
accessed only by restarting Windows. Do you want to schedule this disk check
to occur the next time you restart the computer?]]

Click YES.

Then reboot.

For a look at the chkdsk log.

Open the Event Viewer...
Start | Run | Type: eventvwr | Click OK |
Look in Application | Listed as Information |
Event ID: 1001
Source: Winlogon
[[Description: This includes file system type; drive letter or GUID, and
volume name or serial number to help determine what volume Chkdsk ran
against. Also included is whether Chkdsk ran because a user scheduled it or
because the dirty bit was set.]]

[[When Autochk runs against a volume at boot time it records its output to a
file called Bootex.log in the root of the volume being checked. The Winlogon
service then moves the contents of each Bootex.log file to the Application
Event log.]]

[[This file states whether Chkdsk encountered any errors and, if so,
whether they were fixed.]]



--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In

 

[Guest]

what's the command to set the drive to NOT dirty? (e.g., fsutil dirty ..... e

 

[Wesley Vogel]

Go here:
http://www.kellys-korner-xp.com/xp_tweaks.htm

Read the instructions at the top of the page.
Scroll down to:
82. Disable or Enable Check Disk Upon Boot
Click on Disable.

So people know WTF you're replying to...

When replying to a message, include enough original material to be
understood.

Because...

It is possible to see a response to a message before seeing the original.

It is possible to see a response to a message without seeing the
original.

Giving context helps everyone.

OE | Tools | Options | Send tab | Select Include message with reply |
Click Apply | Click OK

Include message with reply
[[Specifies whether to include the text of the original message when you
reply to a message. You can edit or cut any of the text. If you clear this
check box, the body of your message contains only the text you type or
paste.]]

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In