Dialer

  • Thread starter Thread starter Georgia
  • Start date Start date
G

Georgia

Hi,
I am on a dial-up ISP and will regretfully be on it for some time to come.
I am looking for a dialer program that will keep dialing until the best
possible connection is made with the ISP. I usual have to connect and
disconnect and connect again several times to get the best connection.

I am not looking for any kind of accelerator, just a dialer to get the best
possible connection . This is for a WindowsXP Home SP2.

Thank you,
Georgia
 
I am looking for a dialer program that will keep dialing until the best
possible connection is made with the ISP.

How would the dialer know what was best?

I knew a dialer app once that would carry on and on - dialling,
disconnecting and redialling - until it hit a specific IP range.

Is this what you mean?
 
In article "Georgia said:
Hi,
I am on a dial-up ISP and will regretfully be on it for some time to come.
I am looking for a dialer program that will keep dialing until the best
possible connection is made with the ISP. I usual have to connect and
disconnect and connect again several times to get the best connection.

I am not looking for any kind of accelerator, just a dialer to get the best
possible connection . This is for a WindowsXP Home SP2.

Thank you,
Georgia
What modem do you use? Some like those using Conexant chips can have min
and max acceptable connect speeds set. Other can auto-rate or connect at
a single speed. Your best connection may be fleeting as it will retrain
downwards if you have a marginal line but still show the original
connect speed. You would have to query the modem after the call to check
the speed at the end.
 
Yes, I am looking for a dialer that will keep dialing until a specific IP
range is obtained. I know that I had a dialer like this on Windows3.1. I
found an old program somewhere in a freeware site but could not get it to
work even using the Compatibility Mode.

I have a Conexant modem. The connection can range from about 28 to 51.
The bottom range is just not acceptable and I manually disconnect and
reconnect until the upper range is reached.

Georgia
 
In article "Georgia said:
I have a Conexant modem. The connection can range from about 28 to 51.
The bottom range is just not acceptable and I manually disconnect and
reconnect until the upper range is reached.
try info from here
http://www.modemsite.com/56k/x2-linklimit.asp#rock
Unless it's your ISP modem pool that is all over the place the variation
will come from your line so don't be too tight with your limits. I find
that limiting the top speed reduces the chance of retraining which can
cause dropouts.
 
"Georgia" said:
Yes, I am looking for a dialer that will keep dialing until a specific IP
range is obtained. I know that I had a dialer like this on Windows3.1. I
found an old program somewhere in a freeware site but could not get it to
work even using the Compatibility Mode.

I have a Conexant modem. The connection can range from about 28 to 51.
The bottom range is just not acceptable and I manually disconnect and
reconnect until the upper range is reached.

Georgia

Georgia,

Then you are looking for a program which evaluates the connection speed
not the IP address range, correct?

Bud
 
Yes, I mean a program that will dial until a suitable connection speed is
obtained, not IP address range. My mistake in wording.
 
Hi,
I am on a dial-up ISP and will regretfully be on it for some time to come.
I am looking for a dialer program that will keep dialing until the best
possible connection is made with the ISP. I usual have to connect and
disconnect and connect again several times to get the best connection.

I am not looking for any kind of accelerator, just a dialer to get the best
possible connection . This is for a WindowsXP Home SP2.

Thank you,
Georgia
Take a look at ConnectPro

http://www.modemsite.com/56k/x2-linklimit.asp

http://modemsite.com/56k/_downloads.asp?dl=xflt/other/connectpro111.exe
 
Hi,
I am on a dial-up ISP and will regretfully be on it for some time to come.
I am looking for a dialer program that will keep dialing until the best
possible connection is made with the ISP. I usual have to connect and
disconnect and connect again several times to get the best connection.

I am not looking for any kind of accelerator, just a dialer to get the best
possible connection . This is for a WindowsXP Home SP2.

Thank you,
Georgia
Take a look at ConnectPro

http://www.modemsite.com/56k/x2-linklimit.asp

ftp://ftp.simtel.net/pub/simtelnet/win95/winsock/cp111.zip
 
On Wed, 2 Feb 2005 06:24:32 -0600, wrote...
Yes, I mean a program that will dial until a suitable connection speed is
obtained, not IP address range. My mistake in wording.

Hope you are dialling in on a freephone number :-)
 
I want to thank everyone for their help. I do think that the Alexf Dialer
suggested by sno will meet my dial-up needs.
Thank you again,
Georgia
 
Back
Top