DHCP Problems

V

vovavziggy

When I run an "ipconfig/all" it it says "no" next to "DHCP
Enabled." How do I enable DHCP?
I chose to obtain an IP automatically under the network
properties, so DHCP should be enabled when I run ipconfig.
In my router settings, DHCP is also enabled. It's strange because this
is only happening to one computer, while there are 3 wirelessly
connected to the router. It was working fine and for some reason one
day I turned it on and attempted to repair the connection and it was
got stuck at repairing.
 
C

Chuck

When I run an "ipconfig/all" it it says "no" next to "DHCP
Enabled." How do I enable DHCP?
I chose to obtain an IP automatically under the network
properties, so DHCP should be enabled when I run ipconfig.
In my router settings, DHCP is also enabled. It's strange because this
is only happening to one computer, while there are 3 wirelessly
connected to the router. It was working fine and for some reason one
day I turned it on and attempted to repair the connection and it was
got stuck at repairing.
Click to expand...

This sounds like LSP / Winsock corruption, or maybe a protocol problem.
<http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer-in.html>
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

How do I convert my second Router into an Access Point 0
Computer name resolves to wrong IP 6
Invalid IP Address 1
How come IPConfig /flushdns doesn't work??.... 6
DHCP / DNS 2
Configuring IP address 1
Unable to connect to wireless network 6
Two laptops, one receives wireless DHCP address and the other doesn't 4

Top