dhcp mib

G

Guest

I have a windows 2000 server that is running the ms dhcp server. it also has
the snmp service started. When I try to pull info from the dhcp mib, I don't
get any response. What do I have to do to the server to enable the dhcp mib
in the snmp agent?

snmpwalk -Cc -v2c -c xxxxx yyyyyy .1.3.6.1.4.1.311
SNMPv2-SMI::enterprises.311.1.15.1.1.0 = INTEGER: 0
SNMPv2-SMI::enterprises.311.1.15.1.2.0 = INTEGER: 0
SNMPv2-SMI::enterprises.311.1.15.1.3.0 = INTEGER: 0
SNMPv2-SMI::enterprises.311.1.15.1.4.0 = Counter32: 0
SNMPv2-SMI::enterprises.311.1.15.1.5.0 = Counter32: 0
SNMPv2-SMI::enterprises.311.1.15.1.6.0 = Counter32: 0
SNMPv2-SMI::enterprises.311.1.15.1.7.0 = Counter32: 0
SNMPv2-SMI::enterprises.311.1.15.1.8.0 = Counter32: 0
SNMPv2-SMI::enterprises.311.1.15.1.9.0 = Counter32: 0
SNMPv2-SMI::enterprises.311.1.15.1.10.0 = INTEGER: 0
SNMPv2-SMI::enterprises.311.1.15.1.11.0 = INTEGER: 0
SNMPv2-SMI::enterprises.311.1.15.1.11.0 = No more variables left in this MIB
Vie
w (It is past the end of the MIB tree)
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

SNMP'ing 1
WMI, SNMP and MIBs 0
Cisco 2811 configuration- dissect 1
RRAS + DHCP + WIFI (Wireless) + DNS 8
DHCP Warnings Event ID 1003 4
DHCP Relay Problem 4
DHCP with P/Invoke 5
USMT 3.0 Error 31 0

Top