Connect VPN...just fine. Can't map to share drive through VPN Connection???

K

Kenny Bullock

Hello all;

I am able to VPN to my network at work and check mail using Outlook 2000
with no problems.. I connect just fine. However, if I try to map to a
shared drive on my company's network, I get an error "map network" could not
be found. And my company's domain name is not visible in My Network Places.
I'm using Windows XP Home Edition SP1. Can anyone help me with this issue?

I appreciate it.

Kenny Bullock
Manager of Tech Services
NOLHGA
 
R

Robert L [MS-MVP]

quoted form http://www25.brinkster.com/ChicagoTech
Unable to browse through PPTP/VPN connection
Symptoms: 1. If the WINS server is on the same computer as the PPTP/VPN
server, and you attempt to connect to a computer using a PPTP/VPN client,
you may experience following problem: 1) The NetBIOS name of the computer to
which you are attempting to connect is not resolved. 2) You may receive an
error message similar to the following error message: "System error 53 has
occurred. The network path was not found" when using net view or opening
Network Knighthood.
2. If the WINS server is not on the same computer as the PPTP server and you
attempt to connect to a computer using a PPTP client, you may be able to
connect to computers on your local area network (LAN), but you may be unable
to connect to network shares or resources on the PPTP server.
Resolutions: Inability to browse often means the client can't resolve
NetBIOS names.
1. If this is a workgroup network, enable NetBIOS over TCP/IP on the server
and clients.
2. If this is domain network and the WINS server is on the same computer as
the PPTP/VPN server, move the WINS server to a different computer.
3. Add the NetBEUI protocol for your PPTP tunnel instead of, or in addition
to, TCP/IP.
4. By default, most routers and firewalls prevent the transmission of
NetBIOS names unless you enable UDP ports 137 and 138 and TCP port 139. Try
to enable UDP ports 137 and 138 and TCP port 139 across all routers and
firewalls between the PPTP/VPN client and PPTP/VPN server.
5. Make sure the client has correct DNS, WINS and Master Browser settings.
6. Make sure the default gateway points to the remote network rather than to
the ISP.
7. Some ISP might block ports required for NetBIOS name broadcasts.
8. If WINS address is not distributed upon connection to VPN, LMHOSTS should
be configured to enable Domain to be located.
9. If you try these techniques and the client still can't browse, try to use
UNC to connect to the remote LAN, for example, use the net use h:
\\servername\sharename command.
--
For more and other information, go to
http://www25.brinkster.com/ChicagoTech

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Windows & Network Support, Tips and FAQs on
http://www25.brinkster.com/ChicagoTech
This posting is provided "AS IS" with no warranties.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top