CompactFlash with EWF RAM reg

[Franz Leu]

Hi group

I have a problem using EWF RAM reg mode on a CF disk.
I modified a well working Image according to:

http://msdn.microsoft.com/library/d...lp/html/xegrfconfiguringewframregoverlays.asp

and the deployed to image the target.
FBA ran through and rebooted the target.
Now, shortly after the XPembedded bootscreen comes up,
it always stops with a BSOD Stop 7B.

http://msdn.microsoft.com/library/d...html/xeerrstop7bmissingcriticalbootdevice.asp
doesn't bring me further, since this all worked within the same image.

Who has a idea what I did wrong with the EW`F?

Thanks
Franz

 

[Guest]

Hi Franz Leu" wrote:

The problem for ur Bluescreen may be due to

http://support.microsoft.com/newsgr...&p=1&tid=501168af-463f-4eac-b425-2de4b3c0a89e

Actually the Documentation about configuring the EWF Ram Reg Mode is WRONG

http://support.microsoft.com/newsgr...&p=1&tid=501168af-463f-4eac-b425-2de4b3c0a89e

post will give u the idea

The Ewf Will always be enabled when you configure using the microsoft
documentation.

 

[Franz Leu]

Hi Srivathsan

Thanks for the links.
I removed the "VolSnap" and used EWF only ... and it worked!
Did you add a second filter with VolSnap? What if I don't?
MS really should correct this article!

Thanks and best regards
Franz

 

[KM]

Franz,

I removed the "VolSnap" and used EWF only ... and it worked!
Did you add a second filter with VolSnap? What if I don't?
MS really should correct this article!

The "VolSnap" value should be there there if you happended to add "Volume
Shadow Copy Service" component to your image.
Just one more filter driver (please note that the UpperFilters is MultiSZ
value)

KM