ByVal Target Range Great Code but need Help

[Guest]

I am getting help, yet I need further help. The formula I post below, works
for B3 and to the right. I need it to work exactly the same from B3 thru B100
and have numbers in the entire row work as B3 does . That is B49 moves to
C49, C49 moves to D49 etc.

Do I need a code for each line? That would seem horribly wrong.
Thank you: Check this. Works great for one line B3. It's a great code

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address <> "$B$3" Or _
IsEmpty(Target) Or _
Not IsNumeric(Target) Then
Exit Sub
End If
If MsgBox("Use the new value " & Target & _
" as new Daily Entry?", vbYesNo + vbDefaultButton1 _
+ vbInformation, "Verify Entry") <> vbYes Then
Target.ClearContents
Exit Sub
End If
'overwrite E3 with D3
Range("E3") = Range("D3")
'overwrite D3 with C3
Range("D3") = Range("C3")
'overwrite C3 with B3
Range("C3") = Target
'clear B3 for tomorrow
Target.ClearContents
End Sub

Need B1:B100 to work this way

 

[Bernie Deitrick]

Mark,

Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("B1:B100")) Is Nothing Or _
IsEmpty(Target) Or _
Not IsNumeric(Target) Or _
Target.Cells.Count > 1 Then
Exit Sub
End If
If MsgBox("Use the new value " & Target & _
" as new Daily Entry?", vbYesNo + vbDefaultButton1 _
+ vbInformation, "Verify Entry") <> vbYes Then
Target.ClearContents
Exit Sub
End If
'overwrite old values
Application.EnableEvents = False
Target.Resize(1, 3).Cut Target.Offset(0, 1)
Application.EnableEvents = True

End Sub


HTH,
Bernie
MS Excel MVP

 

[Guest]

try:

Private Sub Worksheet_Change(ByVal Target As Range)
Const WS_RANGE As String = "B1:B100"


On Error GoTo ws_exit:
Application.EnableEvents = False
If Not Intersect(Target, Me.Range(WS_RANGE)) Is Nothing Then
If IsEmpty(Target) Or _
Not IsNumeric(Target) Then
Exit Sub
End If
If MsgBox("Use the new value " & Target & _
" as new Daily Entry?", vbYesNo + vbDefaultButton1 _
+ vbInformation, "Verify Entry") <> vbYes Then
Target.ClearContents
Exit Sub
End If
Row = Target.Row
Range("c" & Row).Resize(1, 2).Copy Range("d" & Row)
'overwrite C3 with B3
Range("C" & Row) = Target
'clear B3 for tomorrow
Target.ClearContents

End If
ws_exit:
Application.EnableEvents = True
End Sub

 

[Guest]

Sorry it didn't work : The code I have works acrros B3

It did not work in any cell between B4:b100

Your assistance is hugely appreciated

Mark

 

[Guest]

Topper formula starts working down the line then quits working. When I go
back up to B# it doesn't ask "Yes" just stops.

Very close. I thought you had it...something stopped

 

[Bernie Deitrick]

Sorry it didn't work : The code I have works acrros B3

It did not work in any cell between B4:b100

It does work, on every cell in the range B1:B100, as long as

1) you enter a value into a single cell
2) you enter a number

If you want to lift the single cell restriction, then remove


Or _
Target.Cells.Count > 1

HTH,
Bernie
MS Excel MVP

 

[Guest]

Try:

Incoroprated some of Bernie's better code!

Private Sub Worksheet_Change(ByVal Target As Range)

Const WS_RANGE As String = "B1:B100"


On Error GoTo ws_exit:
Application.EnableEvents = False
If Intersect(Target, Me.Range(WS_RANGE)) Is Nothing Or _
IsEmpty(Target) Or _
Not IsNumeric(Target) Then
GoTo ws_exit
End If
If MsgBox("Use the new value " & Target & _
" as new Daily Entry?", vbYesNo + vbDefaultButton1 _
+ vbInformation, "Verify Entry") <> vbYes Then
Target.ClearContents
GoTo ws_exit
End If

Target.Resize(1, 3).Cut Target.Offset(0, 1)



ws_exit:
Application.EnableEvents = True
End Sub

 

[Guest]

I enter a number in B3 sometimes down to B100

I need that # to go to C3, I need C3 to overide D3 and D3 ro overide e3,
basically continue to track the last 3 entries.

My formula only works for B3

Additional info F3 is =average(C3:E3)

 

[Bernie Deitrick]

If you mean that whatever is entered in a cell in B1:B100 get put onto row 3 only, then you could
replace

Target.Resize(1, 3).Cut Target.Offset(0, 1)

with

Target.Copy
Range("C3").Insert Shift:=xlToRight
Range("F3").Clear 'This is optional
Target.Clear

HTH,
Bernie
MS Excel MVP

 

[Guest]

DANG! BERNIE!

If I could give you more than one Perfect rating I would Thank you, Thank
You, Thank You

Question. I have a duplicate of this on sheet 2:

Is there anyway to merger the 2 sheets. That is ,as if I would copy (sheet2)
From A1 to J100 and paste it into sheet 1 around L1? Can you run both on one
formula or must the entire thing be redone?

Thanks anyway fanfriggin tastic!

Mark

 

[Guest]

Perfect. I executed your code wrong. As I posted below. i would love to run 2
of these side by side on the same sheet devided by one column. Can it be done?

You guys are Fanatstic.

Mark

 

[Guest]

try changing:

Target.Resize(1, 3).Cut Target.Offset(0, 1)

to

Target.Resize(1, 3).Copy Target.Offset(0, 1)
Target.ClearContents

HTH

 

[Guest]

To execute another range:

change to:

Const WS_RANGE As String = "B1:B100, L1:L100"

Date must be ENTERED into L1:L100 as copy/paste doesn't invoke the code.

 

[Guest]

Ya know, I keep getting this message. "Macros can not be run because your
security levels are too high" I am set on medium. How do I make this go away

Mark

 

[Guest]

Waht do you mean date must be entered... Where"..Thanks.

Mark

 

[Guest]

I entered Const WS_RANGE As String = "B1:B100, L1:L100"

When I write to L3 it copies to C4

I sorta want the L3 group to write to L4 as B3 writes to B4

Almost there.. What wonderful help..

Thank you.

Mark

 

[Guest]

Use this code:

Private Sub Worksheet_Change(ByVal Target As Range)
Const WS_RANGE As String = "B1:B100, L1:L100"


On Error GoTo ws_exit:
Application.EnableEvents = False
If Intersect(Target, Me.Range(WS_RANGE)) Is Nothing Or _
IsEmpty(Target) Or _
Not IsNumeric(Target) Then
GoTo ws_exit
End If
If MsgBox("Use the new value " & Target & _
" as new Daily Entry?", vbYesNo + vbDefaultButton1 _
+ vbInformation, "Verify Entry") <> vbYes Then
Target.ClearContents
GoTo ws_exit
End If

Target.Resize(1, 3).Copy Target.Offset(0, 1)
Target.Clear


ws_exit:
Application.EnableEvents = True
End Sub

 

[Guest]

Topper, I am modified to 4:100 (across the board) had to put some titles in!!

Just friggin Brilliant! It may appear that I am freeloading, but, I am
passing along what you are helping me with:

QUESTION: to the code you sent!!!!: can we add.... In Column Q4:Q100 the +/-
amount. (Which is the +/- of the figure that ends up in M4:M100) ?

To clarify, when I enter a figure in L4:L100 and hit enter it all jumps
right. My last of the 3 entries in that area are in M column.

Q4:Q100 column is needed to show a +/- of (M4:M100)

Thanks for everything.

mark

 

[Bernie Deitrick]

Mark,

After this line

Target.Clear

Add this:

If Target.Column = 12 Then
Cells(Target.Row,17).Value = _
Cells(Target.Row,17).Value + _
Cells(Target.Row,13).Value
End if

 

[Guest]

Bernie, Thank you. I screwed this all up. Let me see if I can un-FOG my brain.

In you guys MVP's formula ..I will repost I would like this:

In my formula I would like:

I messed this up, mostly because I have made a change.. Please let me restate:


I would like M Column M4:M100 to be the +/- the numbers down I4:I100 "I"
column is driven by what I type in H.

L is the target L4:100

ie: If L20 is 25 and I4 is 18 then M4 is +7 or 7
If L4 is 20 and I4 is 14 then M4 is -6

AS I4:I100 gets a new #, L changes. (it's and average)

Can you help me make (M4:100) be +/-) I column)
I would like the old M4:M100 to move to N4:N100,
Then the old N4:N100, to move to O4:O100,
and Old O4:O100 drops off.

My formula is this presently:
Private Sub Worksheet_Change(ByVal Target As Range)
Const WS_RANGE As String = "B4:B100, H4:H100"


On Error GoTo ws_exit:
Application.EnableEvents = False
If Intersect(Target, Me.Range(WS_RANGE)) Is Nothing Or _
IsEmpty(Target) Or _
Not IsNumeric(Target) Then
GoTo ws_exit
End If
If MsgBox("Use the new value " & Target & _
" as new Daily Entry?", vbYesNo + vbDefaultButton1 _
+ vbInformation, "Verify Entry") <> vbYes Then

GoTo ws_exit


End If

Target.Resize(1, 3).Copy Target.Offset(0, 1)
Target.Clear

If Target.Column = 12 Then
Cells(Target.Row, 17).Value = _
Cells(Target.Row, 17).Value + _
Cells(Target.Row, 13).Value
End If


ws_exit:
Application.EnableEvents = True
End Sub


Thank you Mark



I see no action in it may be because I have compressed the sheet in to fit
on on portrait page and I did not correct where you need to hit the target.

May I please repeat.