Bug Report - v1.0.701

[Guest]

as i noticed on previous versions, the daily scan schedule does not work with
24 hour clock

e.g. 21:30 is applied as 09:30am - i havent found a way to schedule a scan
after 11:59am!

im running winxp sp2

 

[Bill Sanderson]

Change your clock to a 12 hour clock, make the scan schedule setting, and
change the clock back to 24-hour. The schedule will remain intact.

 

[Guest]

Change your clock to a 12 hour clock, make the scan schedule setting, and
change the clock back to 24-hour. The schedule will remain intact.

--




I tried this Bill and it still reverts to am. Le

 

[Bill Sanderson]

This should work--the scan may appear to be set to am, but it should
actually happen at the PM time it was set at.

This issue has been with us since July 18th, so the solution has had lots of
exercise. One way to set your time format to a 12 hour one is to select
English (United States) as your language setting--then set the
schedule--then reset the language back to your normal choice.

 

[Guest]

This should work--the scan may appear to be set to am, but it should
actually happen at the PM time it was set at.

This issue has been with us since July 18th, so the solution has had lots of
exercise. One way to set your time format to a 12 hour one is to select
English (United States) as your language setting--then set the
schedule--then reset the language back to your normal choice.


Seems reasonable Bill. Will give it a try and report back. Cheers. Lee