BSOD after Update / Disable Driver via Recovery Console

G

Guest

I run an update from Windows XP to Windows Vista RC 1 (5600). The Upgrade
Advisor told me to uninstall Alcohol120% and some Nero Products - OK I did.

After the Update-Process Vista won't boot. The boot-process stopped with the
message "Missing or corrupt .. NETFLT.SYS".

I identified the File as a Panda-Antivirus-WebProxy Service...

The question is: How can I disable the Service? The Vista Startup Repair
runs for hours before I abort it (always hanging at "Analyzing Eventlogs")
and has no effect. The (XP-Recovery-Console) Commands "DISABLE", "LISTSVC"
aren't available anymore to disable the service...

Thank you for every help!
 
G

Guest

I guess you tried going into control panel => administration tools =>
services then scroll down to the panda web proxy and stopped the service?

I got the same problem, I'm just going to try that now.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Recovery Console - BSOD 2
BSOD when trying to re-install Windows Ultimate 64bit 5
Recovery console, Update 5
Upgrade Advice. 2
return to last video driver via recovery console 1
BSOD after disaster recovery 1
BSOD with all modes after driver update 6
Black screen after fixbbot fixmdr on recovery console. 6

Top