Bad network drives

I

iainking

If I do a full restart and login, after a little while I get a network
drive mapped to every letter. All these drives map to the same place,
but when I try to disconnect any of them I get a "Network connection
cannot be found" error. A 'net use' will list all the drives I map in
the login script, but does not list any of these extra drives.
Re-running the login script, which disconnects all network drives
before mapping a list of locations, does not help either.
Anyone had this problem before, or have a clue as to what is causing
it?

Iain
 
G

Guest

I seem to recall this was a issue with the indexing service. Disable it in
services and see if this solves your issue. Might want to check and make
sure you are up on all the service pacs
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Logon Script to map drives/printers then run a .exe file.....error occurs 2
Mapped drives disconnecting 1
Why does login script fails to map all network drives 2
mapped drives 2
Windows 2000 Mapping Drives 2
logon script easy question 1
Mapping to a DFS Root 2
login script does not working 2

Top