AMD 64 3700 wont install XP pro 32 bit

B

Boaby

Hello folks,

I have the following specs:

Lan Party N f4 Ultra D Motherboard.
160 GB SATA HD as SATA 1
512 DDR 400 Megabyte of RAM on Dimm Slot 2 (because it is only one
module as the instruction manual says it must be there to work correctly)
EIDE CD - ROM 52x as Primary master.
EIDE ROCIH DVD as Primary slave.
GForce 6800 Ultra on PCI - E.
AMD Athlon 64 3700+ 939 socket.

The problem is when I install Windows XP Pro 32 bit version. It does not
seem to see my SATA 160 GB hard drive? Now I have just saw a floppy disk
that says 'SATA RAID Driver Disk nVIDUA nf4 Silicon Image 3114 Rev 1.0'
I am assuming this must be installed in order to work but how can I
install the disk if I have no OS on my blank SATA 160 GB HD!

I did notice something during the installation as Windows XP ask if you
'Press F6 if you want to install a third party SCSI or Raid device' or
Automatic Recovery. I dont know what these options are?

Any advice of wisdom would be appreaciated.

Bob
 
C

Cari \(MS-MVP\)

You need to have that floppy drive handy. When it asks you to press F6, do
so. Point it at the floppy and it will pick up the SATA drivers.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top