Wireless network through a cable modem

  • Thread starter Thread starter ArifZ
  • Start date Start date
A

ArifZ

I've just registered up with blueyonder broadband. I
brought a Belkin wireless kit (network cards and wireless
dsl modem) to go with that. Blueyonder requested that I
register the mac addresses of all the kit connected to
the cable modem. This allows me to connect to the
internet but only one pc at a time. Is their a way I can
configure it so only the mac address of the wireless
modem is registered and all the pc's connect throught the
modem _ I know this is simple but I'm not familiar with
setting up the TCP/IP configurations - can anyone
help ???
 
"ArifZ" said:
I've just registered up with blueyonder broadband. I
brought a Belkin wireless kit (network cards and wireless
dsl modem) to go with that. Blueyonder requested that I
register the mac addresses of all the kit connected to
the cable modem. This allows me to connect to the
internet but only one pc at a time. Is their a way I can
configure it so only the mac address of the wireless
modem is registered and all the pc's connect throught the
modem _ I know this is simple but I'm not familiar with
setting up the TCP/IP configurations - can anyone
help ???
Click to expand...

Connect to the router's built-in web server from one of the computers,
then either:

1. Determine the MAC address of the router's WAN interface, or:

2. Clone the MAC address of one of the computers.

Then, give the selected MAC address to Blueyonder.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com
 
Back
Top