Wireless network bridge

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Good afternoon

I have problems trying to configurate a network bridge between a wireless network and a wired network. One computer has a 2 network adapters: a wireless 802.11b and a ethernet NIC. In this computer I configured a network bridge between both connections. All the computer of the wireless networks detecs a wireless network available, but they can not access the computers located in the wired network.

Can someone help. I would like to know which is the procedure to setup a wireless ad-hoc network, and how to brigde it with a wired network.

Thanks in Advance


Juan Araya
Costa Rica
(e-mail address removed)
 
Good afternoon

I have problems trying to configurate a network bridge between a wireless network and a wired network. One computer has a 2 network adapters: a wireless 802.11b and a ethernet NIC. In this computer I configured a network bridge between both connections. All the computer of the wireless networks detecs a wireless network available, but they can not access the computers located in the wired network.

Can someone help. I would like to know which is the procedure to setup a wireless ad-hoc network, and how to brigde it with a wired network.

Thanks in Advance
Click to expand...

This Microsoft Knowledge Base article might help:

Bridge May Not Work With a Non-Promiscuous Mode Network Adapter
http://support.microsoft.com/?id=302348
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com
 
Back
Top