Windows Vista Quitting

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Periodically my Windows Vista Home Premium quits and gives me a black screen.
I have to then shut down the computer and restart. Any assistance would be
appreciated.
 
Restart in Safe Mode and check the Event Viewer to see if there any logged
messages related to hardware failure and report back here.
 
I have a Toshiba Laptop. I'm not sure where to find the Event Viewer when I
start the computer in Safe Mode.
 
Andre,

Here are the Error Messages I found that I think have to do with hardware.

1. IRQARB: ACPI BIOS does not contain an IRQ for the device in PCI slot 5,
function 0. Please contact your system vendor for technical assistance. Same
error for slot 4 & 6


2. Kernel-WHEA
Machine Check Event reported is a fatal Bus or Interconnect error.
Memory Hierarchy Level: 0
Participation: 3
Request Type: 15
Memory/IO: 0
Address: 0

Thanks for any help you can give me.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Windows 10 shutdown black screen 13
Booting Vista Home Premium 13
Vista wont load after windows update installed 2
Vista continually tries to configure updates and then restarts 6
How do I repair my C: boot record? 1
Vista Premium doesn't reboot doesn't restart 4
Vista Ultimate Upgrade Failure 1
Vista Start-up Problem 2

Back
Top