What is the stop error code in this mini dump file?

  • Thread starter Thread starter Greg Ro
  • Start date Start date
G

Greg Ro

What is the stop error code in this mini dump file?
I may know what program caused this. I just need to see what the stop
code is.

I used dumpchk.exe

Thank you for this infomation

Loading dump file Mini070805-01.dmp
----- 32 bit Kernel Mini Dump Analysis

DUMP_HEADER32:
MajorVersion 0000000f
MinorVersion 00000a28
DirectoryTableBase 00039000
PfnDataBase 81053000
PsLoadedModuleList 8055a420
PsActiveProcessHead 805604d8
MachineImageType 0000014c
NumberProcessors 00000001
BugCheckCode 000000c2
BugCheckParameter1 00000007
BugCheckParameter2 00000cd4
BugCheckParameter3 0000187d
BugCheckParameter4 81da2660
PaeEnabled 00000000
KdDebuggerDataBlock 8054c060
MiniDumpFields 00000dff

TRIAGE_DUMP32:
ServicePackBuild 00000200
SizeOfDump 00010000
ValidOffset 0000fffc
ContextOffset 00000320
ExceptionOffset 000007d0
MmOffset 00001068
UnloadedDriversOffset 000010a0
PrcbOffset 00001878
ProcessOffset 000024c8
ThreadOffset 00002728
CallStackOffset 00002980
SizeOfCallStack 000005ac
DriverListOffset 000031c0
DriverCount 0000007d
StringPoolOffset 000056e0
StringPoolSize 00001140
BrokenDriverOffset 00000000
TriageOptions 00000041
TopOfStack f7be8a54
DebuggerDataOffset 00002f30
DebuggerDataSize 00000290
DataBlocksOffset 00006820
DataBlocksCount 00000004
 
I figured out the bug check code is the stop code,

Now, I got to figure out the other codes

Greg Ro
 
Dumpchk checks that va dump is valid. It's of no possible use.

============================================================

Get your XP CD and install Windows Support Tools.


Type in start run after installing and rebooting


pstat > "%userprofile%\desktop\driverl­ist.txt"


The last table in this file is a list of loaded drivers. Other things apart
from hardware uses drivers. Post the list of drivers (the last table only -
REPEAT THE LAST TABLE O N L Y ) or match the fault address to the driver.

This will allow you to match memory addresses to a driver.
============================================================

Type verifier in Start Run, follow the wizard but choose All Drivers. This will slow down your computer and cause more blue screen crashes but will pinpoint what is causing the crash (if the original error message didn't). Once you fix it you rerun verifier and turn it off.

If you can't start after enabling verifier
choose Last Known Good Configuration at the Failed Boot menu (which will
start without verifier).


You will be creating a crash dump file in c:\windows\minidump every blue screen. Make sure you are set to record minidumps (Small Memory Dumps) - type it in Help to see how.

Then

If you have the XP SP2 Security Update CD (else see
http://www.microsoft.com/whdc/­devtools/debugging/symbolpkg.m­spx
)


Install symbols from <CD Drive Letter>:\SUPPORT\SYMBOLS

Download
http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx

Load the crash dump file into windbg
and read what it says
Type
!Analyze -v
into Windbg's command line.
(this will hopefully tell you the faulty component)

If the above is too technical then email the crash dump files to davidc @ mvps.org. Don't send me lots of them. Just the one from your last crash after you turn verifier on. And only one per mail.

You can look up specific details here
http://msdn.microsoft.com/library/d..._ea8b9fd0-2d81-4a04-a7ed-c1c6a80bd501.xml.asp

If it indicates faulty memory might be the cause you can get a memory tester
here
http://oca.microsoft.com/en/wi­ndiag.asp


If it mentions a core windows system file, meaning it a MS fix is required,
upload a minidump to

http://oca.microsoft.com

Also try typing the main error code in Help while online (ie,
Stop 0x50
and also try in the 8 digit form
stop 0x00000050)
and if there are too many hits use a filename if available. Generally memory
addresses are different for each computer (as each computer has a different
mix of drivers) so parameters that are memory addresses aren't that useful for searching, but NTStatus codes are (plus you can look them up here http://cvs.sourceforge.net/viewcvs.py/mingw/w32api/include/ddk/ntstatus.h?rev=1.2).
 
David

According to different page.
The stop error code 000000c2
One said I need to replace the ram.

Another said
It could be a program that cause that stop code.

You link on the memory test didn't work.

So is there any other program that could test your ram to see if it
really bad.

Since, I have two slots which ram would I replace?


Greg Ro


snip
 
I wrote a longer reply then I saw you had snipped. Don't talk to me again.
Click to expand...

Don't give me links that don't work. I was snipping because it was
way to long.

Greg R
 
You are an idiot. The link does work. Try typing it you lazy piece of shit.
I'm the only person here who can help as the others are far to stupid. Did I say run a memory test - no I didn't..

You refused to follow my instructions preferring the advice of morons. My answer, in full, is all you need to know for any stop error.

You have also breached civil law by snipping my post as I didn't give permission and I DO claim my artist's moral rights under NSW legislation. That is you can't use it in a way I disapprove of - I disapprove of morons that snip. It is also unethical. And more to the point noone, incl me, will know what you are talking about.

It's simple - don't post here.
 
You are an idiot. The link does work. Try typing it you lazy piece of shit.
I'm the only person here who can help as the others are far to stupid. Did I say run a memory test - no I didn't..

You refused to follow my instructions preferring the advice of morons.
My answer, in full, is all you need to know for any stop error. ROFLOL

You have also breached civil law by snipping my post as I didn't give permission and I DO claim my artist's moral rights under NSW legislation. That is you can't use it in a way I disapprove of - I disapprove of morons that snip. It is also unethical. And more to the point noone, incl me, will know what you are talking about.
Click to expand...

David,
Final Comment


This is a public newsgroup. You didn't say your post is
copyrighted. If i'm not mistake copyrighted post are not allowed
on Microsoft News servers. If claim you post is copyrighted.
Then I would have to snip it. It would be illegal for me to repost
it.

Yes, you did tell link to a memory test page. Which didn't work.

I think you need the find other place to post if you worried about
someone snipping your post.

This is getting way of topic. I asked for help and you gave me some
information which was not helpful, plus you didn't answer my other
questions.

Greg R


..
 
I gave you everything you need to know. You do not have a memory problem. Type that link in. It will work. Don;t click it (and blame google for why it looks like a legal link - nothing to do with me and don't ask how google stuvk their nose in).

I told you clearly what to do. You refuse to do what I say. You DO NOT NEED A MEMORY TESTER (most likely) moron.

Do you know it takes a day to run. The morons you prefer to listen to have no clue whatsoever. When you come back to them and say I spent 16 hours doing this and it all passed they'll just say "oh well - it was worth a shot". And it probably wasn't worth a shot.

Your particular error is caused by a faulty driver.
 
So my procedure that takes 2 minutes after you install the stuff I said. Or their procedure that takes a day. The error code indicates my procedure is the one that is most likely to work. But you would know this if you read my whole post and read the links I provided..

--
--------------------------------------------------------------------------------------------------
http://webdiary.smh.com.au/archives/_comment/001075.html
=================================================
"David Candy" <.> wrote in message I gave you everything you need to know. You do not have a memory problem. Type that link in. It will work. Don;t click it (and blame google for why it looks like a legal link - nothing to do with me and don't ask how google stuvk their nose in).

I told you clearly what to do. You refuse to do what I say. You DO NOT NEED A MEMORY TESTER (most likely) moron.

Do you know it takes a day to run. The morons you prefer to listen to have no clue whatsoever. When you come back to them and say I spent 16 hours doing this and it all passed they'll just say "oh well - it was worth a shot". And it probably wasn't worth a shot.

Your particular error is caused by a faulty driver.
 
Back
Top