W2K reboots during heavy network period

  • Thread starter Thread starter Eric Turner
  • Start date Start date
E

Eric Turner

I'm working on a system (P111/512 PC133 RAM) that has wave
station running ( saving songs to hdd ) and system reboots
during heavy workload. I replaced Power supply (had 145w
and changed to 300w) thinking there was a heavy power draw
but system still reboots. There was a high draw on the
power supply but this was negligible after replacement of
Power supply.
Any thoughts?
Sincerely,
Eric Turner
 
Turn off Automatically Reboot so you can read the error message

Control Panel, System, Advanced, Startup and recovery, and Uncheck it.
 
Also while you're there make sure that your system is set to save at
least a small memory dump. Then when it crashes, use dumpchk.exe to
analyze the memory dump and see what's causing the fault.
Turn off Automatically Reboot so you can read the error message

Control Panel, System, Advanced, Startup and recovery, and Uncheck it.
Click to expand...




.................................................................
Posted via TITANnews - Uncensored Newsgroups Access-=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-
 
Back
Top