W XP

  • Thread starter Thread starter Hermann
  • Start date Start date
H

Hermann

Whem I start the pc I get this:

Væg operativsystem:

Microsoft Windows XP Home Edition
Microsoft Windows XP Home Edition
Microsoft Windows XP Home Edition

Brug Pil op eller Pil ned til at markere dit valg.
Tryk på ENTER for at rælge.


Tryk på F8 felfinding og avancerede startidstillenger for
Windows.

Than I have to use the 2nd on the list. How can I make
stop, so whem i start the pc will go directly to the
windows I use.

Tak, Hermann Faria
 
Go to Start > Run and type: MSCONFIG , and hit enter.
Click on the BOOT.INI tab and then click on "Check All Boot Paths"
to delete incorrect boot paths.

If the above does not correct the issue, then:

Right-click on MY COMPUTER and select:

Properties > Advanced > Startup and Recovery Settings > Edit

CAREFULLY edit your boot.ini file to remove the SECOND entry.
Your boot.ini file should then look similar to this:

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect


--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect your PC!
http://www.microsoft.com/security/protect/

---------------------------------------------------------------------------------------


Whem I start the pc I get this:

Væg operativsystem:

Microsoft Windows XP Home Edition
Microsoft Windows XP Home Edition
Microsoft Windows XP Home Edition

Brug Pil op eller Pil ned til at markere dit valg.
Tryk på ENTER for at rælge.


Tryk på F8 felfinding og avancerede startidstillenger for
Windows.

Than I have to use the 2nd on the list. How can I make
stop, so whem i start the pc will go directly to the
windows I use.

Tak, Hermann Faria
 
thank you for you replay,

How do I know wicth Windows i will erase, because if I do
erase the one Im useing I wont be able to start windows
again. I have to erase the fist and the last one in the
list. How do I know that?

Thank you again
-----Original Message-----
Go to Start > Run and type: MSCONFIG , and hit enter.
Click on the BOOT.INI tab and then click on "Check All Boot Paths"
to delete incorrect boot paths.

If the above does not correct the issue, then:

Right-click on MY COMPUTER and select:

Properties > Advanced > Startup and Recovery Settings > Edit

CAREFULLY edit your boot.ini file to remove the SECOND entry.
Your boot.ini file should then look similar to this:

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft
Click to expand...
Windows XP Home Edition" /fastdetect
 
It´s Me again,

I´ve done what you said, but I just have a problem to
know that do to when how. In Properties > Advanced >
Startup and Recovery Settings > Edit
I found 3 "Microsoft Windows XP Home Edition" /fastdetect,
select than and here is how apear here:

1: [boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS.1
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS.1="Microsoft
Windows XP Home Edition" /fastdetect
signature(c6ae7f08)disk(0)rdisk(0)partition(1)
\WINDOWS.0="Microsoft Windows XP Home Edition" /fastdetect
signature(c6ae7f08)disk(0)rdisk(0)partition(1)
\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect

2: [boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS.1
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS.1="Microsoft
Windows XP Home Edition" /fastdetect
signature(c6ae7f08)disk(0)rdisk(0)partition(1)
\WINDOWS.0="Microsoft Windows XP Home Edition" /fastdetect
signature(c6ae7f08)disk(0)rdisk(0)partition(1)
\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect

3: [boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS.1
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS.1="Microsoft
Windows XP Home Edition" /fastdetect
signature(c6ae7f08)disk(0)rdisk(0)partition(1)
\WINDOWS.0="Microsoft Windows XP Home Edition" /fastdetect
signature(c6ae7f08)disk(0)rdisk(0)partition(1)
\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect

Remember when I start the computer I have to take the 2nd
one in this list:

Væg operativsystem:
Microsoft Windows XP Home Edition
Microsoft Windows XP Home Edition
Microsoft Windows XP Home Edition

Brug Pil op eller Pil ned til at markere dit valg.
Tryk på ENTER for at rælge.
Click to expand...

How do I know?

Thanks Again
-----Original Message-----
Go to Start > Run and type: MSCONFIG , and hit enter.
Click on the BOOT.INI tab and then click on "Check All Boot Paths"
to delete incorrect boot paths.

If the above does not correct the issue, then:

Right-click on MY COMPUTER and select:

Properties > Advanced > Startup and Recovery Settings > Edit

CAREFULLY edit your boot.ini file to remove the SECOND entry.
Your boot.ini file should then look similar to this:

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft
Click to expand...
Windows XP Home Edition" /fastdetect
 
Did this :Go to Start > Run and type: MSCONFIG , and
hit enter.
Click on the BOOT.INI tab and then click on "Check All
Boot Paths"
to delete incorrect boot paths.

What do I have todo here:

[boot loader]
timeout=30
default=multi(0)disk(0)partition(1)\windows.1
[operating systems]
multi(0)disk(0)partition(1)\windows.1="Microsoft XP Home
Editiom"/fastdetect
signature(c6ae7f08)disk(0)partition(1)
\windows.0="Microsoft XP Home Editiom"/fastdetect
signature(c6ae7f08)disk(0)partition(1)\windows="Microsoft
XP Home Editiom"/fastdetect


Thanks again
 
Back
Top