USB 2.0 Flash drive problem

  • Thread starter Thread starter RJH
  • Start date Start date
R

RJH

Hi...I have posted elsewhere but have had no replies....

I have been using 2 flash drives on my system for over a year now with no
problems until a couple of weeks ago...I can not copy files larger than 1
meg from my hard drives to the flash drives (large files that were on the
flashdrive will transfer to the hardrives fine)! I get an error that the
"File Path is too deep" or an "Input/Output" error.
I disconnected the flash drives from the usb hub and plugged 1 only into the
usb port directly and still the same problem. I tested and used the flash
drives in my laptop(XP Home USB 2.0 enhanced) and they work fine there. Is
there a place in System
Files or elsewhere that I can check what might be causing this?

System is new P4 3.06 Gig 1 gig DDR and XP Pro USB 2.0

Thanks
RH
 
USB Hub Power Management - disable : Start/run, type DEVMGMT.MSC , then rightclick each USB Hub device, Properties, uncheck the box
on the Power Management tab.
 
Back
Top