Unique SID for 10 PC

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello
Is it posible to make 10 PC with unique SID from one PC? If cmiResealPhase=0 after configuring the system and making 10 clones and change there names is it posible to start the fbreseal command manually to have 10 PC with unique SID

Best regard

Gasdo
 
Gasdo,

You can start clone process just before you shut down your master device.

When you first boot any of your 10 PCs clone phase will make unique
settings, etc. Then you can change other parameters if you want.

Regards,
Slobodan

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Have an opinion on the effectiveness of Microsoft Embedded newsgroups? Tell
Microsoft!
https://www.windowsembeddedeval.com/community/newsgroups
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Gasdo said:
Hello,
Is it posible to make 10 PC with unique SID from one PC? If
Click to expand...
cmiResealPhase=0 after configuring the system and making 10 clones and
change there names is it posible to start the fbreseal command manually to
have 10 PC with unique SID.
 
I have few WinXPE PC which have cloned from one image and have same SID. Can i simply copy the FBRESEAL.EXE from WinXPE image which have System cloning component added to these WinXPE and start manualy to make them with unique SID's
I would like to thank you for your hel

Best regard

Gasdo
 
You would need to enter some registry entries required by cloning tools,
etc. Probably this is not a good and efficient idea if you only want to
change SID.

You should disable EWF if you have it.
And try using solutions like:
http://www.sysinternals.com/ntw2k/source/newsid.shtml

Regards,
Slobodan

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Have an opinion on the effectiveness of Microsoft Embedded newsgroups? Tell
Microsoft!
https://www.windowsembeddedeval.com/community/newsgroups
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Gasdo said:
I have few WinXPE PC which have cloned from one image and have same SID.
Click to expand...
Can i simply copy the FBRESEAL.EXE from WinXPE image which have System
cloning component added to these WinXPE and start manualy to make them with
unique SID's?
 
Back
Top