the system has recovered from a serious error

  • Thread starter Thread starter john
  • Start date Start date
J

john

I have updated microsoft and used the patch. Activated
the firewall. Installed Norton antivirus 2004, and yet my
PC constantly shuts down and restarts. I changed the
setings from 1 min to 30 minutes. I followed the
instructions from the fax you sent me. I have reinstalled
Windows XP yet my PC is not stable. I get the error that
I wrote in the Subject all the time teling me that Error:
BCCode:50 BCP1:E9FC&C94 OSCer:5_1_2600 SP:1_0 Product256_1
Contents
C:\WINDOWS\Minidump\Mini090903-03.dmp
C:\DOCUME~1\John\LOCALS~1\Temp\WER31.tmp.dir00\sysdata.xml

Please HELP!!!!!
 
WHAT THE **** ARE YOU TALKING ABOUT??!?!?!?!?
TRY READING THE ****ING NONSENSE YOU TYPED!!!!
 
I have no idea about the fax etc but is this relevant to you:


http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q308041
Resources for Troubleshooting Startup Problems in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q317277
You Receive a "System Has Recovered from a Serious Error" Message After
Every Restart

Event ID: 1003
Windows XP issues 'The System Has Recovered from a Serious Problem' at start
up?
This problem is generally the result of a corrupted System Restore feature.
To fix the problem:
1. Control Panel / System.
2. Select the System Restore tab.
3. Check the Turn off System Restore box.
4. Press OK and press Yes to confirm.
5. Shutdown and restart Windows XP.
NOTE: You may still receive The system has recovered from a serious problem
message.
6. Control Panel / System.
7. Select the System Restore tab.
8. Uncheck the Turn off System Restore box.
9. Press OK.
10. Shutdown and restart Windows XP.

Also you can solve this problem by recreating the pagefile. To recreate the
pagefile, follow these steps:
1. Click Start.
2. Right-click My Computer.
3. Click Properties.
4. On the Advanced tab, in the Performance section, click Settings.
5. In the Virtual Memory section, click Change.
6. For Paging file size for selected drive, click No Paging File and then
click Set.
7. Click Yes after the following warning appears:
Note: If the paging file on volume X: has an initial size of less than xx
megabytes, then the system may not be able to create a debugging information
file if a STOP error occurs. Continue anyway?
(X is the drive letter and xx is the amount of RAM installed on your
computer minus 1 megabyte.)
8. Click System Managed Size.
9. Click OK four times, and then restart the computer when you are prompted.
An alternative method:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;255205
How to Delete the Pagefile.sys File in Recovery Console
 
Back
Top