The 3th VGA driver is not working?

[zebing zhou]

I down ct69030 xp driver,and compentize it by following the Steps in the
MS Windows XP Embedded Community Tips section of the MS website;
but when the system reboot,in FBA;it say "[FBAChangeDisplaySettings]
Settings not found! "
why?Has anyone else had this problem, or does anyone have any
suggestions?


Thanks

 

[Slobodan Brcin \(eMVP\)]

Use google groups to find answers you need.

http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&q=FBAChangeDispl
aySettings&btnG=Google+Search&meta=group%3Dmicrosoft.public.windowsxp.embedd
ed.*

Let us know if you need some specific guidance.

Regards,
Slobodan

 

[zebing zhou]

i check the ntbtlog.txt,
and find "Did not load driver
\SystemRoot\system32\drivers\ChipsXPm.sys";
i think it may be the filepath error;but how can i do?
the driver path is:E:\winxpE\Vamp8_WinXP,how to write in?

Use google groups to find answers you need.

http://groups.google.com/groups?hl=...&meta=group=microsoft.public.windowsxp.embedd
ed.*

Let us know if you need some specific guidance.

Regards,
Slobodan

I down ct69030 xp driver,and compentize it by following the Steps in the
MS Windows XP Embedded Community Tips section of the MS website;
but when the system reboot,in FBA;it say "[FBAChangeDisplaySettings]
Settings not found! "
why?Has anyone else had this problem, or does anyone have any
suggestions?


Thanks

 

[Zhang Zhiqun]

In the default setting of FBA components, the [FBAChangeDisplaySettings] error is always exist. No matter.

The problem of cannot load driver is the key!

Did you include those driver files to COMPONENTS?

i check the ntbtlog.txt,
and find "Did not load driver
\SystemRoot\system32\drivers\ChipsXPm.sys";
i think it may be the filepath error;but how can i do?
the driver path is:E:\winxpE\Vamp8_WinXP,how to write in?

Use google groups to find answers you need.

http://groups.google.com/groups?hl=...&meta=group=microsoft.public.windowsxp.embedd
ed.*

Let us know if you need some specific guidance.

Regards,
Slobodan

I down ct69030 xp driver,and compentize it by following the Steps in the
MS Windows XP Embedded Community Tips section of the MS website;
but when the system reboot,in FBA;it say "[FBAChangeDisplaySettings]
Settings not found! "
why?Has anyone else had this problem, or does anyone have any
suggestions?


Thanks

 

[zebing zhou]

i have included the files,but them path is:E:\winxpE\Vamp8_WinXP,not default
path;and i do not konw is it the metter?
are there document that more clear about how to built 3th mcomponent?and may
you list to me?

In the default setting of FBA components, the [FBAChangeDisplaySettings]

error is always exist. No matter.

The problem of cannot load driver is the key!

Did you include those driver files to COMPONENTS?

i check the ntbtlog.txt,
and find "Did not load driver
\SystemRoot\system32\drivers\ChipsXPm.sys";
i think it may be the filepath error;but how can i do?
the driver path is:E:\winxpE\Vamp8_WinXP,how to write in?

Use google groups to find answers you need.

http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&q=FBAChangeDisp l
aySettings&btnG=Google+Search&meta=group%3Dmicrosoft.public.windowsxp.embed d

ed.*

Let us know if you need some specific guidance.

Regards,
Slobodan

I down ct69030 xp driver,and compentize it by following the Steps in
the
MS Windows XP Embedded Community Tips section of the MS website;
but when the system reboot,in FBA;it say "[FBAChangeDisplaySettings]
Settings not found! "
why?Has anyone else had this problem, or does anyone have any
suggestions?


Thanks

 

[Zhang Zhiqun]

So you should be checking your build log and release forder to see if those files are OK!

i have included the files,but them path is:E:\winxpE\Vamp8_WinXP,not default
path;and i do not konw is it the metter?
are there document that more clear about how to built 3th mcomponent?and may
you list to me?

In the default setting of FBA components, the [FBAChangeDisplaySettings]

error is always exist. No matter.

The problem of cannot load driver is the key!

Did you include those driver files to COMPONENTS?

i check the ntbtlog.txt,
and find "Did not load driver
\SystemRoot\system32\drivers\ChipsXPm.sys";
i think it may be the filepath error;but how can i do?
the driver path is:E:\winxpE\Vamp8_WinXP,how to write in?


"Slobodan Brcin (eMVP)" <[email protected]> дÈëÏûÏ¢ÐÂÎÅ
:[email protected]...
Use google groups to find answers you need.


http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&q=FBAChangeDisp l

aySettings&btnG=Google+Search&meta=group%3Dmicrosoft.public.windowsxp.embed

d

ed.*

Let us know if you need some specific guidance.

Regards,
Slobodan

I down ct69030 xp driver,and compentize it by following the Steps in
the
MS Windows XP Embedded Community Tips section of the MS website;
but when the system reboot,in FBA;it say "[FBAChangeDisplaySettings]
Settings not found! "
why?Has anyone else had this problem, or does anyone have any
suggestions?


Thanks

 

[Brad Combs]

zebing,

I've seen this error on other C&T adapters when a 32bit color depth is
specified, and a maximum of 24bit is supported by the adapter. TD often does
not give an option for 24bit, only 16 and 32. Could you try specifying 16bit
as the color depth in the settings of your component and see if FBA
resolution change is successful?

HTH,

Brad Combs
Imago Technologies

So you should be checking your build log and release forder to see if those files are OK!

i have included the files,but them path is:E:\winxpE\Vamp8_WinXP,not default
path;and i do not konw is it the metter?
are there document that more clear about how to built 3th mcomponent?and may
you list to me?

In the default setting of FBA components, the

[FBAChangeDisplaySettings]
error is always exist. No matter.

The problem of cannot load driver is the key!

Did you include those driver files to COMPONENTS?

http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&q=FBAChangeDis p
l

aySettings&btnG=Google+Search&meta=group%3Dmicrosoft.public.windowsxp.embe d
d

ed.*

Let us know if you need some specific guidance.

Regards,
Slobodan

I down ct69030 xp driver,and compentize it by following the

Steps
in

the
MS Windows XP Embedded Community Tips section of the MS website;
but when the system reboot,in FBA;it say "[FBAChangeDisplaySettings]
Settings not found! "
why?Has anyone else had this problem, or does anyone have any
suggestions?


Thanks