Slow startup beacause of harddrive

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

hey, i recently installed a old hardrive i had on my last computer and since
i installed it the computer takes longer time to start,
Is there any setting i can change so that it goes faster to start? i have
formatted the harddrive but that didnt help
 
Generally the slowest device will determine the speed for the channel so try
moving it to the drive controller's other channel. Also check the
instructions for your hardware.

--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect
 
You don't say how "old" your old hard disk is. New IDE hard disks have
faster electronics than older hard disks. You should always run Windows from
the fastest hard disk you can manage.

Something else you could check is whether your old hard disk is using the
faster DMA transfer mode rather than the slower PIO mode. To find out, go to
Control Panel > System> Hardware tab > Device Manager button > Primary IDE
Channel Properties (the disk with Windows should be the Master on the
Primary IDE channel) > Advanced Settings.

You could also download and run the disk diagnostics available from the disk
manufacturer's web site. That should tell you if the disk itself has a
problem.

With large hard disks (120GB - 160GB) commonly available for less than $50,
you really should be running Windows from a fast hard disk.
 
Ted

I have two drives. The primary has Ultra DMA Mode 1 for Device 0 and for
Device 1. The Secondary has Ultra DMA Mode 1 for Device 0 and PIO Mode
for Device 1.

What does this mean?

TIA
 
DMA is short for direct memory access, a technique for transferring data from main memory to a device without passing it through the CPU.

Ted Zieglar
 
Back
Top