Sequence field

  • Thread starter Thread starter Stu
  • Start date Start date
S

Stu

I'm relatively new to using sequence fields, but I have
been successful until today.

HERE'S WHAT I DO: Insert field braces with Ctrl F9.
Type "SEQ" [space] identifier such as "int." Toggle the
field codes, after which a "1" has always appeared.
Today I did the same thing but after toggling the field
codes no "1" appeared.

THEN THE MOST MYSTIFYING THING HAPPENED. For reasons I
don't know, I highlighted the space where the "1" should
have appeared when toggled, hit Alt+F3 and was able to
add the "int" in the autotext box and the sequence system
worked perfectly from that point on in that particular
sequence.

Thinking that this was an isolated incident, I kept
trying sequence fields with different identifiers and
each time the "invisible" 1 appeared.

Although eventually I get the job done, can you tell me
what in the world I've done to cause the first "1" to be
invisible, yet when highlighted works in autotext?!

Thanks so much.
 
After toggling off the field codes just press F9 (update field) and the one
will appear.

That is usually required for all fields that are created manually (using
Ctrl+F9).

--
Please post any further questions or followup to the newsgroups for the
benefit of others who may be interested. Unsolicited questions forwarded
directly to me will only be answered on a paid consulting basis.

Hope this helps
Doug Robbins - Word MVP
 
Thank you, Doug! Thank you!
-----Original Message-----
After toggling off the field codes just press F9 (update field) and the one
will appear.

That is usually required for all fields that are created manually (using
Ctrl+F9).

--
Please post any further questions or followup to the newsgroups for the
benefit of others who may be interested. Unsolicited questions forwarded
directly to me will only be answered on a paid consulting basis.

Hope this helps
Doug Robbins - Word MVP
I'm relatively new to using sequence fields, but I have
been successful until today.

HERE'S WHAT I DO: Insert field braces with Ctrl F9.
Type "SEQ" [space] identifier such as "int." Toggle the
field codes, after which a "1" has always appeared.
Today I did the same thing but after toggling the field
codes no "1" appeared.

THEN THE MOST MYSTIFYING THING HAPPENED. For reasons I
don't know, I highlighted the space where the "1" should
have appeared when toggled, hit Alt+F3 and was able to
add the "int" in the autotext box and the sequence system
worked perfectly from that point on in that particular
sequence.

Thinking that this was an isolated incident, I kept
trying sequence fields with different identifiers and
each time the "invisible" 1 appeared.

Although eventually I get the job done, can you tell me
what in the world I've done to cause the first "1" to be
invisible, yet when highlighted works in autotext?!

Thanks so much.
Click to expand...

.
Click to expand...
 
Back
Top