SATA Drive With Legacy Power

  • Thread starter Thread starter Peter
  • Start date Start date
P

Peter

I'm installing a Western Digital WD740GD SATA hard drive in a PC I'm
building. For the data connection to the motherboard I'm using a SATA
cable. For the power connection do I have to use the SATA power connector
on the back of the drive or can I use the "legacy power" connector on the
drive? In other words, is it OK to mix ... SATA for data, legacy for
power?

Peter
 
I'm installing a Western Digital WD740GD SATA hard drive
in a PC I'm building. For the data connection to the motherboard
I'm using a SATA cable. For the power connection do I have
to use the SATA power connector on the back of the drive
or can I use the "legacy power" connector on the drive?

Doesnt matter, whatever is convenient.
In other words, is it OK to mix ...
SATA for data, legacy for power?

Yep.
 
Peter said:
In other words, is it OK to mix ... SATA for data, legacy for
power?

Yes. Just don't connect both legacy _power_ connector and SATA power
connector at the same time. There should be a warning label to that
effect on the drive.
 
"Legacy power" is +12v, +5v, and ground.

"sATA power" is +12v, +5v, +3.3v, and ground.

As long as your sATA drive doesn't actually make use of the newly
available +3.3v, you should be OK.
 
Peter said:
I'm installing a Western Digital WD740GD SATA hard drive in a PC I'm
building. For the data connection to the motherboard I'm using a SATA
cable. For the power connection do I have to use the SATA power connector
on the back of the drive or can I use the "legacy power" connector on the
drive?
In other words, is it OK to mix ... SATA for data, legacy for power?

What mix?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top