Remove network

  • Thread starter Thread starter Green Valley
  • Start date Start date
G

Green Valley

I hope this isn't too confusing. Bottom line is that I want to remove all
networks and start anew.

All of these computers are in one physical location running through a
router.

Network #1. Win 98 and XP Laptop
Computer 1 is running Win 98 and is on a network with Computer 2, which is a
laptop, is running XP.

Network #2 Win 98 and XP Desktop
Computer 1 is running Win 98 and is on a network with Computer 3, which is a
desktop running XP.

Network #3 Win 98 and XP Laptop and XP Desktop
Computer 1 is running Win 98 and is on a network with Computer 2, which is a
laptop running XP and Computer 3 is a desktop running XP.

I built these networks just by using the network wizard on XP. Everything
runs fine but very slowly. Now it is taking forever to print anything from
any computer. So, I want to destroy all of these networks and set up one
network which will be the exact same structure as Network #3 listed above.
So, my question is...
How do I remove these networks? I know how to build the network, just don't
know how to remove them.
Thanks in advance.
GV
 
Start -> Run -> type in: devmgmt.msc and press the <Enter> key. Expand
Network Adapters and uninstall any network adapters that you use for the LAN
connection. Then close out of Device Manager and restart. Let Windows detect
any adapters and you should be able to configure a new connection for the
network.

_____________
Eric
 
Back
Top