Ram Disk by arsoft didn't work.....

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello, I'm newbie and i have a problem with the software in object. My XPe
works on a compact flash and I need to create a virtual partition to share in
a network. I would like to use arsoft's product, but when I install it, I can
see it in the explorer windows but i can't access to it. How can I understand
if I missing some essential files in my XPe image ???

Thank you
 
Thank you KM !! Yes I included FAT component in my image, but it didn't work.
At least I finded another virtual ram disk in the net and it works. But now I
have a problem with a shared drive. Dos client Pc saves some data in my XPe
sharing drive. I have used net config wizard to configure my networks (no
domain and static IP addresses), I enabled file sharing and all works fine,
but from yesterday
dos client never access to shared drives because it wants a password. I
don't understand why. Exscuse for my bad english, Can you help me ?
 
Andrea,

You would need to give us some more info about your problems if you want a help.

By Dos client PC - do you mean MS DOS running on a PC?
Do you see the same issue accessing a XP Pro machine (over NetBEUI?) from the same DOS client?
How do you use the share? Show us the exact commands please.

KM
 
KM said:
Andrea,

You would need to give us some more info about your problems if you want a help.

By Dos client PC - do you mean MS DOS running on a PC?
Click to expand...

Yes, I have an application running on ms dos OS with network card NE2000
compatible. I installed ms client and I ping with XPE pc. I use tcp/ip
protocol and it work.
Do you see the same issue accessing a XP Pro machine (over NetBEUI?) from the same DOS client?
Click to expand...

No, it works fine. Besides before yesterday it still worked fine on XPe!
How do you use the share? Show us the exact commands please.
Click to expand...

I hope to make myself understood: In the property of "My computer" I change
name and workgroup (start wizard). Next in the folder options i enabled "Use
simple sharing ...". Then I right click on my drive, I selected tab "sharing"
and I click on "if you understood ....". Start a new wizard and it ask my
type of network, if there's a internet connection, name of pc and workgroup
etc..... Then in the "sharing" appeared two options: "Share this folder on
the network" and "allow network users to change my files". I check togheter
and then, before yersterday, it worked fine.
 
Andrea,

Last time I worked with MS DOS Network Client many, many years ago.. I don't recall all the details now.

GUI stuff (wizards, etc.) usually does not help you much with troubleshooting network problems.
About the command I was asking for what you do on the DOS client.
Do you use net use command? Why don't you want to type a password?

Also, set "ForceGuest" value of [HKLM\SYSTEM\FBA\RegMigrate\HKLM\System\CurrentControlSet\Control\Lsa] key to "1". (at runtime or in
your Configuration under "File Sharing" component's registry section).

You may also want to post the question to a network newsgroup.
 
Hello Km,
in the dos client I use net shell, but it works fine, I'm sure. Now I
don't know why, but I check your suggest registry key and I didn't find it .
Then I setted it and all works fine. I have to investegate because the key
probably was erased ande wizard didn't set it!!!

Thank you very much


KM said:
Andrea,

Last time I worked with MS DOS Network Client many, many years ago.. I don't recall all the details now.

GUI stuff (wizards, etc.) usually does not help you much with troubleshooting network problems.
About the command I was asking for what you do on the DOS client.
Do you use net use command? Why don't you want to type a password?

Also, set "ForceGuest" value of [HKLM\SYSTEM\FBA\RegMigrate\HKLM\System\CurrentControlSet\Control\Lsa] key to "1". (at runtime or in
your Configuration under "File Sharing" component's registry section).

You may also want to post the question to a network newsgroup.

--
Regards,
KM, BSquare Corp.

Yes, I have an application running on ms dos OS with network card NE2000
compatible. I installed ms client and I ping with XPE pc. I use tcp/ip
protocol and it work.


No, it works fine. Besides before yesterday it still worked fine on XPe!


I hope to make myself understood: In the property of "My computer" I change
name and workgroup (start wizard). Next in the folder options i enabled "Use
simple sharing ...". Then I right click on my drive, I selected tab "sharing"
and I click on "if you understood ....". Start a new wizard and it ask my
type of network, if there's a internet connection, name of pc and workgroup
etc..... Then in the "sharing" appeared two options: "Share this folder on
the network" and "allow network users to change my files". I check togheter
and then, before yersterday, it worked fine.
Click to expand...
Click to expand...
 
Back
Top