RAID0 problems ....all of a sudden...

  • Thread starter Thread starter Jeppe Dige Jespersen
  • Start date Start date
J

Jeppe Dige Jespersen

.....i get a "ntfs.sys is missing or corrupted" error at boot, one morning.

I have an Asus P5GDC Deluxe Mobo with two Maxtor disks in a RAID0
configuration. Windows XP Pro is (doh!) installed on this raid volume.

I have tried to do a repair with my WinXP cd, but have had no luck detecting
the raid'ed disks, even when providing a driver on a floppy at
"repair-time". And I do believe I am using the rigth drivers.

It's as if I just lost contact with that RAID volume completely.
Any ideas, inputs, condolences?

Thanks, hopefully :-)

J.Jespersen
 
SATA disks? Are the cables and connections good?


--
Tumppi
Reply to group
=================================================
Most learned on nntp://news.mircosoft.com
Helsinki, Finland (remove _NOSPAM)
(translations from FI/SE not always accurate)
=================================================
 
SATA disks? Are the cables and connections good?

The setup has run stable for a month, so yes, sata disk :-), and I cables
and connections look fine.
Then one night I shut it down. Next morning...... no boot.
"ntfs.sys missing or corrupt."

Goin' crazy here. Not kidding. ....ok, maybe a little.
J.J.
 
Back
Top