M
maximilianp
Dear Windows professionals, i need help!
I have a Config, where the W2K domain controllers are connected over a
VPN tunnel.
Last wednesday due to work on the electricity network, i had to
shutdown one side of the network. (3 w2K-server)
So here is me first problem:
It sometimes occures, that the W2K Server has a completely wrong clock
setting after a reboot.
So happend yesterday, the clock was set at April 8th 2003, when i
bootet the system after the electricians had their work finished.
I have configured the server to syncronize with one ntp-server over
the internet, but that didn´t work (The ntp server was pingable)
so i set the clock manually...which leads to my second problem:
When i had set the clock back to the correct time, i could not connect
from other two w2k servers (at the same location)
The error message is:" Logon failure: the target account name is
incorrect"
Now With the servers in the same location it is working again (i don´t
know why), but with the one connected over the vpn tunnel it is still
not possible to connect. Also a reboot of the VPN-Connected server did
not solve the problem.
By searching for the reason for this error i found a third problem:
I thougt that the name resolution of the server could be responsible
for this error. So i tried a reverse dns request for the VPN-Connected
server.
The VPN-Connected server could be resolved by sending the request
directly from the server with has the DNS Server running.
But: When i tried to resolve the name over the VPN connection against
the same DNS server i get a "non existent domain" error???
Again: the request is sent to one dns server, but from different
locations!
Please, i really need help!
I have a Config, where the W2K domain controllers are connected over a
VPN tunnel.
Last wednesday due to work on the electricity network, i had to
shutdown one side of the network. (3 w2K-server)
So here is me first problem:
It sometimes occures, that the W2K Server has a completely wrong clock
setting after a reboot.
So happend yesterday, the clock was set at April 8th 2003, when i
bootet the system after the electricians had their work finished.
I have configured the server to syncronize with one ntp-server over
the internet, but that didn´t work (The ntp server was pingable)
so i set the clock manually...which leads to my second problem:
When i had set the clock back to the correct time, i could not connect
from other two w2k servers (at the same location)
The error message is:" Logon failure: the target account name is
incorrect"
Now With the servers in the same location it is working again (i don´t
know why), but with the one connected over the vpn tunnel it is still
not possible to connect. Also a reboot of the VPN-Connected server did
not solve the problem.
By searching for the reason for this error i found a third problem:
I thougt that the name resolution of the server could be responsible
for this error. So i tried a reverse dns request for the VPN-Connected
server.
The VPN-Connected server could be resolved by sending the request
directly from the server with has the DNS Server running.
But: When i tried to resolve the name over the VPN connection against
the same DNS server i get a "non existent domain" error???
Again: the request is sent to one dns server, but from different
locations!
Please, i really need help!