Print limitations

  • Thread starter Thread starter DEH
  • Start date Start date
D

DEH

I have a 36 inch plotter which I would like to plot out wide tables so I can
see the whole thing. Is there a limitation of 22.75 x 22.75 inches. I can
export these tables to Excel and plot them out that way. That is a pain. I
am using Access 2007.
 
Yes: there is a limit to the width of the report, and the height of a
section.

Internally, Access uses measurements are in twips (1400 twips = 1 inch.) The
max. signed short integer is 32767. So if that represents twips, 32767 /
1440 gives you the max. size in inches that Access can handle.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Plot a report at E size 2
report page size limitation 1
Generating a cut list 11
Paper Width 1
Paper Size Issue 1
Maximum Report Page Size 1
My Access report is too wide all the columns are overlapping 3
Print issues with length limit of Office Powerpoint 1

Back
Top