OT: (Hardware - Projector) Remote connection

  • Thread starter Thread starter Rikk
  • Start date Start date
R

Rikk

Being a long time behind the PPT person and not so often a meeting room
setup tech, I am a little in the dark about a couple of things. Today I am
wondering what mechanisms are used/preferred in connecting the PC running
the presentation and the projector when the distances are greater than the
length of the cable which came with the projector? Is it typically wireless,
a long cable, both, something else, and if multiple choices exist, could
some one fill in pros and cons or point me toward a good resource?

Thank you.

Rikk.
 
Most common is premium quality (triple shielded) long VGA cables. If over
100' use two cables, connecting them with a VGA signal booster/extender
(http://www.kvms.com/kvm_extenders/video_extenders.asp).

--
Best Regards,
Troy Chollar
TLC Creative Services, Inc.
troy at tlc creative dot com
www dot tlccreative dot com
==================================
A Microsoft PowerPoint MVP
==================================
 
Or if greater distances are required you could use VGA to cat5 tx/rx
such as Magenta's. You also have the added benefit of sending audio as
well.
 
Back
Top