No Bootup

  • Thread starter Thread starter sue
  • Start date Start date
S

sue

Hi
Hope some can help please.
I have two computers running xp one has decided not to boot up. I have put
this hd into a external caddy to try and read it but says disk not formated.
Now I know I could format it but it contains quite a few backups which I
require. Is there any way that I can get it to boot
Any suggestions would be helpful
Thanks
Lady
 
sue said:
Hi
Hope some can help please.
I have two computers running xp one has decided not to boot up. I have put
this hd into a external caddy to try and read it but says disk not formated.
Now I know I could format it but it contains quite a few backups which I
require. Is there any way that I can get it to boot
Any suggestions would be helpful
Thanks
Lady
Click to expand...

Try hooking it up to the IDE as a slave drive and see if you can
recuperate the data.

Alias
 
Someone else had a same problem.
This info was provided. I never tried it. So I can't verify the information.

At this time, do nothing with the drive or you may lose information.

The drive has lost it's partition structure or it's partition "type".

This happens occasionally. To my knowledge no one has ever figured out "why"
it happens!

The fix is not for the faint of heart and there is one thing that you
absolutely need to know before you begin. What TYPE of FILE SYSTEM was being
used on the hard drive? If you are 100% certain that you know there is (may
be) a way to recover.

There is a little DOS program included with Partition Magic 8.01. It is
called ptedit. This program can only be used from within "pure DOS". When
you use Partition Magic 8.01 to create the 2 disk floppy set (the DOS
version of Partition Magic) this little program is placed in the set.

You have to boot the computer from disk 1 of the floppy set. Then insert
disk 2 when asked to. After you are in Partition Magic, EXIT from the
program. You will be back at the A: prompt. Re-insert floppy disk 1.

Now, type in ptedit and press enter. The program will start. This program
allows you to change the drive "type". It is imperative that you are certain
that you are working on the correct drive. You can choose drives at the top
of the program window. Once you have chosen the correct drive, click in the
**Line 1 | Type** box.

This will energize the "Set_Type" box at the bottom. Now click the mouse on
the "Set_Type" BOX. Look for the file system that you KNOW was being used.
There are many choices. Choose the correct file system and follow the
instructions from there.

NOTE: If you choose the wrong file system, and commit the change, you "may"
corrupt any information that is on the drive. If this happens you may as
well format the drive and start over in a clean state.

I have successfully recovered about a dozen drives that have gone RAW, or
otherwise lost their partition structure, by using this great little DOS
program.

NOTE: The program CAN NOT be used from within Windows.

And "shame" on the computer manufacturers who deliver new computers without
a floppy drive installed!


There is also a Windows version of ptedit called ptedit32. The usage is the
same. Search Google to find a source for this utility.
 
Dixonian69 said:
Someone else had a same problem.
This info was provided. I never tried it. So I can't verify the information.
Click to expand...

<snip>

If you're going to post someone else's answer verbatim, you should have
the courtesy to list a credit to the author. I think, though I'm not
sure, in this case it was Richard Urban.
 
Back
Top