NEW HARDWARE WIZARD

  • Thread starter Thread starter Geri from London
  • Start date Start date
G

Geri from London

Recently, each time I reboot, the New Hardware Wizard
starts. It asks for Ethernet Controller then Network
Controller then USB device. I have a stand-alone machine
so I do not need Ethernet Controller or Network
Controller; the USB port already works well with the
printer. How do I "magic away" the Wizard?
Geri from London.
 
Could be the motherboard's built in network card is on and Windows is
looking for the drivers.

Boot and go into the BIOS and disable it.
 
Sounds good but how do I do it? Geri from London.
-----Original Message-----
Could be the motherboard's built in network card is on and Windows is
looking for the drivers.

Boot and go into the BIOS and disable it.




.
Click to expand...
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

New Hardware Wizard 2
new hardware wizard at every boot 2
O.T. Can't logon to the Internet: 65
O.T. Can't logon to the internet:: 2
Bypassing the New Hardware Wizard..... 1
Found new hardware, but can't install printer using wizard 3
Files & Settings Transfer Wizard compuet connections 6
How do I clean out unwanted virtual COM ports? 7

Back
Top