Networking and File Sharing....

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I networked 2 computers with a SMC router and am unable to access files
properly. On one computer, I can access the other files and programs, but on
the other computer I can't. I keep receiving the message that the network
path can't be found or I don't have permission from my network administrator.
When I run Network Diagnostics, 1 computer passes all of the tests, but the
other computer keeps failing on the I.P address and I don't know how to
properly change that without messing up my internet connection. I have saved
both logs from both computers and would appreciate any help. I have read
Chuck's website and have previously tried a lot of those things, but I think
my brain is too tired to try again without some help. If anyone can use
Remote Assistance or chat with me while I do this step-by-step, I would be
more than happy. Thank you.
 
Hello...
I am having similar problems. My problem is I’m trying to create a home
network with a desktop computer and a laptop computer. I am using Windows XP
Home w/sp-2 installed on both. I installed a Belkin Pre-N router, The
desktop is hard-wired into the router, and the laptop connects to the
broadband internet via wireless connection (router). I can connect to the
internet just fine with both systems. The problem is I can not see either
system from the other. I think the problem lies in the big red-X in the
Homenetwork icon within the Network Connections function from the control
panel. I have tried the Run command and entered the ip address of the other
system but get a message stating The Network Path was not found. I’m stuck.
I have followed no less than half a dozen articles on setting up your
network, as well as using the Network setup wizard, complete with creating a
disk and loading it in the other computer. In following all the articles,
all the settings they say to check and set seem to be correct. Microsoft
states this is easy to do, however I would certainly disagree. Could anyone
be of assistance? It’s weird, I can't even delete the Homenetwork
connection. The delete is grayed out. Also, I have checked the Device
Manager and no yellow question marks, and a review of the hardware returns a
statement that the hardware is functioning properly. One more thing. In the
screen of Network connections I show 3 listed – Wireless network connection,
1394 connection, and the Homenetwork connection, which has the red-X in it.
The Homenetwork connection sates Network Cable unplugged. There is no cable
attached to the laptop. (I tried that at one time, bought a Crossover cable
but that didn’t work either, i.e. could not transfer files). And yes, file
sharing is turned on for both systems.
 
I'm still having issues, I noticed that on PC#1, I can ping that pc and PC#2;
on PC#2, I can't ping it or PC#1; I'm using a SMC Router and Road Runner
service. I think that my I.P addresses are screwed up somewhere. I'm new to
this and I'm not sure what if anything I need to change on my routers
homepage, i.e DNS server, static I.P, ..... LOL, I've been having the same
problem for weeks and I know it's going to end up being something so simple.
I appreciate any help.
 
Networking Virgin said:
I networked 2 computers with a SMC router and am unable to access files
properly. On one computer, I can access the other files and programs, but on
the other computer I can't. I keep receiving the message that the network
path can't be found or I don't have permission from my network administrator.
When I run Network Diagnostics, 1 computer passes all of the tests, but the
other computer keeps failing on the I.P address and I don't know how to
properly change that without messing up my internet connection. I have saved
both logs from both computers and would appreciate any help. I have read
Chuck's website and have previously tried a lot of those things, but I think
my brain is too tired to try again without some help. If anyone can use
Remote Assistance or chat with me while I do this step-by-step, I would be
more than happy. Thank you.
Click to expand...
 
I'm still having issues, I noticed that on PC#1, I can ping that pc and PC#2;
on PC#2, I can't ping it or PC#1; I'm using a SMC Router and Road Runner
service. I think that my I.P addresses are screwed up somewhere. I'm new to
this and I'm not sure what if anything I need to change on my routers
homepage, i.e DNS server, static I.P, ..... LOL, I've been having the same
problem for weeks and I know it's going to end up being something so simple.
I appreciate any help.
Click to expand...

So did you post both logs from both computers? That's the best way to start.
We can help you, but you have to help us to help you.
 
UPDATE:
I can ping the desktop from the laptop but I can not ping the laptop from
either the desktop or the laptop. Does that given anyone a hint of what the
problem might be? Since the last post I have viewed several more help links
but they all say pretty much the same thing and following the instructions
given have not helped. One other thing... one help link indicated I should
set the simple file sharing check box to enabled, however this option is not
showing in the file Folder Options/View box.
 
UPDATE:
I can ping the desktop from the laptop but I can not ping the laptop from
either the desktop or the laptop. Does that given anyone a hint of what the
problem might be? Since the last post I have viewed several more help links
but they all say pretty much the same thing and following the instructions
given have not helped. One other thing... one help link indicated I should
set the simple file sharing check box to enabled, however this option is not
showing in the file Folder Options/View box.
Click to expand...

Probably a firewall problem. Post the logs from both computers, and we can help
you diagnose.
 
Hello Chuck... Thanks for the reply. What do you mean by "logs". And just
in case I am REALLY out of the loop, how do I get them?
 
Hello Chuck... Thanks for the reply. What do you mean by "logs". And just
in case I am REALLY out of the loop, how do I get them?
Click to expand...

Larry,

OK, I see the problem here. First, you're posting under another thread. Please
start a new thread - it's to your advantage.
<http://nitecruzr.blogspot.com/2005/05/how-to-post-on-usenet-and-encourage.html#Hijacking>
http://nitecruzr.blogspot.com/2005/05/how-to-post-on-usenet-and-encourage.html#Hijacking

When you start the new thread, include "browstat status" and "ipconfig /all"
logs from each computer.
<http://nitecruzr.blogspot.com/2005/10/irregularities-in-workgroup-visibility.html>
http://nitecruzr.blogspot.com/2005/10/irregularities-in-workgroup-visibility.html
 
Back
Top