My Computer is not able to work with iPaq Pockect PC/.

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have USB 2.0 , Windows XP With SP2 and ActiveSync 3.8.
However, everytime i plug in my pocket pC , and the system tells me
that USB Device Not Recognized. How to resolve this ahhh?
btw, i ;ve followed the following instructions
1) uninstall the "Unknown Device"
2) uninstall the "ActiveSync"
3) Unplug everything (USB)
4) restart pc
5 ) install the ActiveSync again
6) plug in the cradle
7) soft reset ppc
8) plug in the PPC
 
In lllevelll <[email protected]> had this to say:

My reply is at the bottom of your sent message:
I have USB 2.0 , Windows XP With SP2 and ActiveSync 3.8.
However, everytime i plug in my pocket pC , and the system tells me
that USB Device Not Recognized. How to resolve this ahhh?
btw, i ;ve followed the following instructions
1) uninstall the "Unknown Device"
2) uninstall the "ActiveSync"
3) Unplug everything (USB)
4) restart pc
5 ) install the ActiveSync again
6) plug in the cradle
7) soft reset ppc
8) plug in the PPC
Click to expand...

I don't know to be honest but in between 5 and 6 try a restart. In other
words install the software at step 5 from the CD. Reboot. Plug in the
hardware. Try that. I have a funky USB camera that will NOT install via any
other method and the same might apply to you. In fact, here's an oddity, if
I install it without rebooting then I'm required to remove the drivers, the
software, and the USB drivers themselves and perform the process as
mentioned or it will never work.

Galen
 
Back
Top