Multiple-Processor vs Single-Processor

  • Thread starter Thread starter Guy Kopel
  • Start date Start date
G

Guy Kopel

Hi,
I have 2 IBM servers from the same model, the hardware of both of them is
the same except to one different, one of them have 2 CPU's and the other one
1 CPU,
I would like to move the hard-disks as they are from one server to another,
the OS is Windows 200 Server,
If I will do so do I need to change anything before moving the hard-disks?
would this move expected to prevent windows from booting?


Thanks,
Guy.
 
Are you adding the disks from server 1 to server 2, or are you
swapping disks from each server to the other server?

I am assuming, since you asked, that you are wanting to take all the
disks out of server 1 and put all the disks from server 2 in it and
then use them in server 1 preserving the data and OS that originally
ran in server 2, to run server 1....

Are they IDE disks or SCSI?
Are they plain vanilla disks or RAID or Dynamic disks?



Hi,
I have 2 IBM servers from the same model, the hardware of both of them is
the same except to one different, one of them have 2 CPU's and the other one
1 CPU,
I would like to move the hard-disks as they are from one server to another,
the OS is Windows 200 Server,
If I will do so do I need to change anything before moving the hard-disks?
would this move expected to prevent windows from booting?


Thanks,
Guy.
Click to expand...
~~~~~~
Bait for spammers:
root@localhost
postmaster@localhost
admin@localhost
abuse@localhost
postmaster@[127.0.0.1]
(e-mail address removed)
~~~~~~
Remove "spamless" to email me.
 
The following article may help answer some of your questions

249694 How to Move a Windows 2000 Installation to Different Hardware
http://support.microsoft.com/?id=249694

--
Daniel Chang, MCSE (NT4, 2000)
Server Setup Group

Search our Knowledge Base at http://support.microsoft.com/directory
Visit the Windows 2000 Homepage at
http://www.microsoft.com/windows2000/default.asp
See the Windows NT Homepage at http://www.microsoft.com/ntserver/

NOTE: Please reply to the newsgroup and not directly to me. This allows
others to add to and benefit from these threads and also helps to ensure a
more timely response. Thank you!
This posting is provided "AS IS" without warranty either expressed or
implied, including, but not limited to, the implied warranties of
merchantability or fitness for a particular purpose.
The views and opinions expressed in this newsgroup posting do not
necessarily express or reflect the views and / or opinions of Microsoft.
Overlord said:
Are you adding the disks from server 1 to server 2, or are you
swapping disks from each server to the other server?

I am assuming, since you asked, that you are wanting to take all the
disks out of server 1 and put all the disks from server 2 in it and
then use them in server 1 preserving the data and OS that originally
ran in server 2, to run server 1....

Are they IDE disks or SCSI?
Are they plain vanilla disks or RAID or Dynamic disks?



Hi,
I have 2 IBM servers from the same model, the hardware of both of them is
the same except to one different, one of them have 2 CPU's and the other one
1 CPU,
I would like to move the hard-disks as they are from one server to another,
the OS is Windows 200 Server,
If I will do so do I need to change anything before moving the hard-disks?
would this move expected to prevent windows from booting?


Thanks,
Guy.
Click to expand...
~~~~~~
Bait for spammers:
root@localhost
postmaster@localhost
admin@localhost
abuse@localhost
postmaster@[127.0.0.1]
(e-mail address removed)
~~~~~~
Remove "spamless" to email me.
Click to expand...
 
I want to take all the disks from server1 and put them on server 2 and keep
the OS
this is SCSI disks (2 mirror for system and 3 in RAID 5 for data)


Overlord said:
Are you adding the disks from server 1 to server 2, or are you
swapping disks from each server to the other server?

I am assuming, since you asked, that you are wanting to take all the
disks out of server 1 and put all the disks from server 2 in it and
then use them in server 1 preserving the data and OS that originally
ran in server 2, to run server 1....

Are they IDE disks or SCSI?
Are they plain vanilla disks or RAID or Dynamic disks?



Hi,
I have 2 IBM servers from the same model, the hardware of both of them is
the same except to one different, one of them have 2 CPU's and the other one
1 CPU,
I would like to move the hard-disks as they are from one server to another,
the OS is Windows 200 Server,
If I will do so do I need to change anything before moving the hard-disks?
would this move expected to prevent windows from booting?


Thanks,
Guy.
Click to expand...
~~~~~~
Bait for spammers:
root@localhost
postmaster@localhost
admin@localhost
abuse@localhost
postmaster@[127.0.0.1]
(e-mail address removed)
~~~~~~
Remove "spamless" to email me.
Click to expand...
 
Back
Top