Multi serial ports card ( Digi AccelePort 16 )

  • Thread starter Thread starter Peter
  • Start date Start date
P

Peter

What components I need to add to project to view additional serial
ports in a application ?
I try:
"Digi AccelePort 16p PCI Adapter",
"Communications Port", "Digi Asyn",
"Digi Ports",
"Plug and Play Software Device Enumerator",
"PnP (User-mode)"
and various combinations of above.
The card is visible in device manager but there are no serial ports.
In WinXP Pro ports are visible without additional drivers

My platform: VIA EPIA CL + Digi AccelePort16 card
 
I used a Rocket port 8 port PCI adapter and had some problems too. You need
control panel, device manger and then check the ports section of device
manager. I had to reinstall the drivers in xpe and additional files from an
i386 directory.
hth
 
hi, I think you guys need to add the "Unimodem" component and possibly its
related dependancy..

regards.
 
Taking a look at what shipped In-Box for XPE, I can see that the Registry
data was never supplied to add the ports to the system for the RocketPort
PCI adapter. I imagine the same is probably true for the Digi products as
well. If you go the to Rocket key under the Service hive for the
CurrentControlSet and export what you see there when you reinstall the
driver and then place that data (paths and values) into the Registry section
of the component, you should be able to build an image which correctly
supports the RocketPort card you are running.
 
Back
Top