Move drive from one system to new system

  • Thread starter Thread starter Rick VH
  • Start date Start date
R

Rick VH

I am building new system. Want to move existing Hard
Drive to new system. Cannot get XP Pro to boot in new
system. Forced new system to acknowledge drive but get
Problem Starting Windows, try start Windows normally,
Last Know Good Cofiguration, Safe Mode, etc...none of
which work. Anyone else had this issue?
Thanks,
Rick
 
Rick;
Last known good will not work because there isn't one with the current
system.

You need to perform a Repair Installation to properly detect the new
hardware.
Repair Installation:
http://www.dougknox.com/xp/tips/xp_repair_install.htm
Windows Updates will need to be reinstalled.
Data should be safe, back-up important data just in case.
Install Service Pack first and by itself.
Then install ALL Critical Updates no more than 4 at a time,

Disconnect the network/modem cable before starting repair and do NOT
reconnect the cable until repair is completed and firewall is
installed/enabled.
http://support.microsoft.com/?kbid=283673
 
Greetings --

Normally, assuming a retail license, unless the new motherboard is
virtually identical to the old one (same chipset, same IDE
controllers, same BIOS version, etc.), you'll need to perform a repair
(a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

As always when undertaking such a significant change, back up any
important data before starting.

This will probably also require re-activation. If it's been more
than 120 days since you last activated that specific Product Key,
you'll most likely be able to activate via the internet without
problem. If it's been less, you might have to make a 5 minute phone
call.


Bruce Chambers

--
Help us help you:



You can have peace. Or you can have freedom. Don't ever count on
having both at once. -- RAH
 
Back
Top