You're going to need a modified voltage.ini file. I'll try to email
one to you. If your listed address here is valid and you get it,
you'll want to rename your current voltage.ini or move it to a holding
subfolder and insert the modified one in it's place.
Also, I'm sure you know, but never open an attachment anyone sends you
without scanning it with a good antivirus program.
Are you running 512Meg on a A8N32-SLI that this is of any concern ?
If you are, it seems that you would have chosen the wrong motherboard
for your applications.
I am running 2GBytes on the A8N32-SLI, probably just like most other
purchasers of this high-end gamer's board. For example, remember that
BF2 requires more than 1Gbyte of memory for optimum performance.
Are you running 512Meg on a A8N32-SLI that this is of any concern ?
If you are, it seems that you would have chosen the wrong motherboard
for your applications.
I am running 2GBytes on the A8N32-SLI, probably just like most other
purchasers of this high-end gamer's board. For example, remember that
BF2 requires more than 1Gbyte of memory for optimum performance.
Well I was just commenting about ram usage cause it seems a bit silly
for a hardware monitor program to need so much ram.
peace out,
Kimmy
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.
