Making a network using gateway instead of hub

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I had recently purchased a new "Linksys wireless-G ADSL Gatway" gateway to
connect more than 1 computer to the internet .But I'm trying to establish a
home network right now with that gateway ,can it be done .And for information
I have tried to start game on network and there was... some psitives .Now can
establish a home network with that gateway ?

My regards ,,,
 
HI
Linksys makes a lot of Hardware with a lot of Exotic names. If you would post the exact
Model number might be that some one can help.
Jack (MVP-Networking).
 
On Thu, 13 Oct 2005 13:15:03 -0700, K. Ansari <K.
I had recently purchased a new "Linksys wireless-G ADSL Gatway" gateway to
connect more than 1 computer to the internet .But I'm trying to establish a
home network right now with that gateway ,can it be done .And for information
I have tried to start game on network and there was... some psitives .Now can
establish a home network with that gateway ?

My regards ,,,
Click to expand...

Your question is a little lacking in detail. Providing the model of the Linksys
would help a bit - if it's a combined modem / router / WAP, then it's perfectly
capable of providing a home network too, and allowing each computer to share
files as well as Internet service. This article should point you in the right
direction.
<http://nitecruzr.blogspot.com/2005/08/networking-your-computers.html>

Please post back here with any additional questions.
 
Hi
It's the WAG54G ver.2 ,it says one of the features is a bilt in router ,I'm
not really sure if that can be used for file and printer sharing ?

My regards,,
 
Hi
It's the WAG54G ver.2 ,it says one of the features is a bilt in router ,I'm
not really sure if that can be used for file and printer sharing ?

My regards,,
Click to expand...

OK, that's a modem / router / WAP combo. It will work fine to establish a home
network, including file and printer sharing.
 
Back
Top