Make new Hard drive bootable

  • Thread starter Thread starter Alan
  • Start date Start date
A

Alan

Installed a 120GB additional hard drive, performed
partitioning, copied all necessary files (system and non-
system) over to it. How do I make this F:\ drive my
new "C" drive, so that it becomes the boot disk? C and F
are on separate IDE interface cables, the new drive is
jumpered as Cable Select.

Thanks.
 
Set the new drive in BIOS on AUTO.

Change the bootdisk in BIOS to the
the port the new hdd is on, and then
reboot. I dont know if it'll work on cable
select. It should be either master or slave

Depending on which IDE port the new hdd is
on.
 
Back
Top