Laser Printer like HP1300

  • Thread starter Thread starter Len
  • Start date Start date
L

Len

Sorry of this is a little off topic but I am desperate and recall from posts
over the months some of you may have a mono laser printer particularly the
HP1300.

My PagePro 1100 L broke down (terminally) yesterday and I have to urgently
get a replacement. I have shortlisted the Brother 5050 and the HP1300 the
latter I seem to recall was used by some of you guys.

I have been fooling my PagePro laser to print right to the bottom. I need to
print down to about .3cm maximum bottom margin otherwise I will waste in the
region of 6,000 pre-printed letters I use in my small business.

Any thoughts on mono printers especially the two on my shortlist would be
appreciated. Also if you can give me the smallest bottom margins sizes. I
have a user manual for the HP but no trace of this figure.

Len
 
Hi Len,

Why not try installing that printer on your computer
(doesn't matter that you don't have it physically) - then
run Word with that printer set as default - go into Page
setup and see what it will allow you to do.

As most of us can't afford more than one or two printers I
find this a very successful way of coping with others
people's machines.

John
 
Len

According to the HP Quick Specs the bottom margin is 5mm on an LJ1300.

--
Terry Farrell - Word MVP
http://www.mvps.org/word/


Sorry of this is a little off topic but I am desperate and recall from posts
over the months some of you may have a mono laser printer particularly the
HP1300.

My PagePro 1100 L broke down (terminally) yesterday and I have to urgently
get a replacement. I have shortlisted the Brother 5050 and the HP1300 the
latter I seem to recall was used by some of you guys.

I have been fooling my PagePro laser to print right to the bottom. I need to
print down to about .3cm maximum bottom margin otherwise I will waste in the
region of 6,000 pre-printed letters I use in my small business.

Any thoughts on mono printers especially the two on my shortlist would be
appreciated. Also if you can give me the smallest bottom margins sizes. I
have a user manual for the HP but no trace of this figure.

Len
 
Terry

Thanks for that. I spent ages looking on the HP website and even downloaded
the user manual but nothing after a looooong time. I have 'bitten the
bullet' and have now ordered an HP 1300 from Staples for delivery today.

Len
 
Len

It is an excellent personal laser.

Terry

Terry

Thanks for that. I spent ages looking on the HP website and even downloaded
the user manual but nothing after a looooong time. I have 'bitten the
bullet' and have now ordered an HP 1300 from Staples for delivery today.

Len
 
Back
Top