Installing XP on a new Hard drive

  • Thread starter Thread starter Robert
  • Start date Start date
R

Robert

I have a new hard drive because mine died and I can't
seem to load XP onto it? I have loaded 98 before and I
thought it would load the same but I get the error that
it cannot load in dos? am I doing something wrong? it is
XP for new installs?
 
The Windows XP CD is bootable and contains all the tools necessary
to partition and format your drive. Follow this procedure and allow
Windows XP to partition and format your drive:

1. Open your BIOS and set your CD Drive as the first bootable device.

===> Accessing Motherboard BIOS
===> http://www.michaelstevenstech.com/bios_manufacturer.htm

2. Insert your Windows XP CD in the CD Drive and reboot your computer.
3. You'll see a message to boot to the CD....follow the instructions.
4. The setup menu will appear and you should elect to delete the existing
Windows partitions, then create a new partition, then format the primary
partition (preferably NTFS) and proceed to install Windows XP.

5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html

[Courtesy of Michael Stevens, MS-MVP]

6. After installing Windows XP, be sure and visit the support website
of the manufacturer of the computer to download and install any
available Windows XP compatible drivers, such as video adapter
and audio drivers.

7. It would be best to physically disconnect all your peripheral hardware
devices, except for you mouse and keyboard, before installing XP.
After XP is installed, visit the support website of the manufacturer
of each hardware device to obtain the latest drivers or software
designed to work with Windows XP.



--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

-------------------------------------------------------------------------------------


| I have a new hard drive because mine died and I can't
| seem to load XP onto it? I have loaded 98 before and I
| thought it would load the same but I get the error that
| it cannot load in dos? am I doing something wrong? it is
| XP for new installs?
 
Greetings --

Simply boot from the WinXP installation CD. You'll be offered the
opportunity to delete, create, and format partitions as part of the
installation process. (You may need to re-arrange the order of boot
devices in the PC's BIOS to boot from the CD.)

HOW TO Install Windows XP
http://support.microsoft.com/default.aspx?scid=KB;en-us;316941

http://www.michaelstevenstech.com/cleanxpinstall.html

http://www.webtree.ca/windowsxp/clean_install.htm


Bruce Chambers

--
Help us help you:



You can have peace. Or you can have freedom. Don't ever count on
having both at once. -- RAH
 
Hello Robert,

You use the following instructions to perform a clean installation of
Windows XP:

Installing to a New Hard Disk
-----------------------------

To install Windows XP to a new hard disk, you must start your computer by
using one of the following:

- Microsoft Windows 98/Windows Me startup disk
- Windows XP boot disks
- Windows XP CD-ROM

For additional information about how to start Setup from MS-DOS or a
Windows 98/Windows Millennium Edition startup disk, click the following
article number to view the article in the Microsoft Knowledge Base:

307848 HOW TO: Start Setup from MS-DOS in Windows XP
http://support.microsoft.com/?id=307848

For additional information about how to obtain the Windows XP Setup boot
disks, click the article number below to view the article in the Microsoft
Knowledge Base:

310994 Obtaining Windows XP Setup Boot Disks
http://support.microsoft.com/?id=310994

NOTE: If you want to start your computer from the Windows XP CD-ROM, your
CD-ROM or DVD-ROM drive must be configured to do so. For information about
how to configure your computer to start from the CD-ROM or DVD-ROM drive,
please refer to the documentation that is included with your computer, or
contact the computer manufacturer.

1. Read the End-User License Agreement, and then press F8.

NOTE: If your Windows XP CD-ROM is an upgrade, you are prompted to insert a
CD-ROM of a previous operating system to check for upgrade compliance.
Remove the Windows XP CD-ROM, and then insert the CD-ROM from your previous
operating system into the CD-ROM drive. Valid qualifying media for upgrade
compliance include:


Windows 98
Windows 98 Second Edition
Windows Millennium Edition
Windows NT 4.0
Windows 2000 Professional

When you receive a prompt for the Windows XP CD-ROM, remove your previous
operating system CD-ROM, and then insert your Windows XP CD-ROM.

2. To install Windows XP by starting the computer from the Windows XP
CD-ROM, insert the Windows XP CD-ROM into your CD-ROM or DVD-ROM drive, and
then restart the computer.

3. When you see the "Press any key to boot from CD" message, press any key
to start the computer from the Windows XP CD-ROM.

4. At the Welcome to Setup screen, press ENTER to begin Windows XP Setup.

5. Follow the instructions on the screen to select and format a partition
in which to install Windows XP.

6. Follow the instructions on the screen to complete Windows XP Setup.

If you require additional assistance you can refer to the complete article
316941 HOW TO: Install Windows XP http://support.microsoft.com/?id=316941

Sincerely,
Jeff Wade [MS]
--------------------
| Content-Class: urn:content-classes:message
| From: "Robert" <[email protected]>
| Sender: "Robert" <[email protected]>
| Subject: Installing XP on a new Hard drive
| Date: Sat, 1 Nov 2003 19:59:29 -0800
| Lines: 5
| Message-ID: <[email protected]>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="iso-8859-1"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
| Thread-Index: AcOg9bc8kxxmvtSJTgGKbL0du0cQhA==
| Newsgroups: microsoft.public.windowsxp.setup_deployment
| Path: cpmsftngxa06.phx.gbl
| Xref: cpmsftngxa06.phx.gbl
microsoft.public.windowsxp.setup_deployment:90404
| NNTP-Posting-Host: TK2MSFTNGXA09 10.40.1.161
| X-Tomcat-NG: microsoft.public.windowsxp.setup_deployment
|
| I have a new hard drive because mine died and I can't
| seem to load XP onto it? I have loaded 98 before and I
| thought it would load the same but I get the error that
| it cannot load in dos? am I doing something wrong? it is
| XP for new installs?
|

Sincerely,

Jeffrey L. Wade
Microsoft Enterprise Platforms Support
 
Back
Top