i386 problem

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I recently ran a virus check, it found that 2 files were corrupt. I somehow
managed to lose my file c:\windows\system32\rundll32.exe I have tried to
scan my files which instructs me to insert my cd, which I do not have because
it was loaded by the manufacturer. I have also used my register to get to the
setup-source path to attempt to redirect to 1386 files, my problem is after
double clicking source path I do not know what to type. Can anyone help?
 
eddie said:
I recently ran a virus check, it found that 2 files were corrupt. I somehow
managed to lose my file c:\windows\system32\rundll32.exe I have tried to
scan my files which instructs me to insert my cd, which I do not have
because
it was loaded by the manufacturer. I have also used my register to get to
the
setup-source path to attempt to redirect to 1386 files, my problem is
after
double clicking source path I do not know what to type. Can anyone help?
Click to expand...

Hi Ed,
yowtch! you got a nasty infestation there.

If you are resetting the Source Path, just type the drive letter, colon,
slash and directory name to indicate where the files are. In other words;
D:\i386

You'll need to know the drive letter that applies, of course. Usually it
would be a CD-Rom drive like D: or E:

Don't forget, nowadays you have to use SpyWare scanners along with
anti-virus. They sometimes work together to foul things up.

HTH,
Don
 
Don:

I so wish this would have helped. I did as you said and changed the c:\
to c:\i386, I hope this was correct. Then restarted, with no efect to my
problem. Would you or anyone have other advise?
 
Back
Top