I am getting "Error: No adapters bound to TCP/IP are enabled for DHCP"

  • Thread starter Thread starter Santa
  • Start date Start date
S

Santa

Guys:

I connected my PC to Router/4port switch, when I do "ipconfig
/release" or "ipconfig /renew" I am getting the following error,. What
was the reason. I can LED blinks on both sides.

I am getting "Error: No adapters bound to TCP/IP are enabled for DHCP"

Also when I give "ipconfig" I gets only IP address as "192.168.0.1"
and Subnetmask as "255.255.2565.0" Why was the reason.
 
Windows is telling you that the network card has a static
IP address and subnet mask configured on it. Right click
on My Network Places and left click on Properties. Right
click on Local Area Connection and left click on
Properties. Double click on Internet Protocol (TCP/IP)
and place a dot beside "Obtain an IP Address
automatically". Click OK and click OK again. You should
now see and IP address, subnet mask and default gateway
when you issue the command ipconfig at the DOS prompt. If
not, restart Windows and unplug/replug the power to the
router and try it again.
 
Back
Top