How to use Wake on LAN

  • Thread starter Thread starter Christian Borchgrevink-Lund
  • Start date Start date
C

Christian Borchgrevink-Lund

Have a PC behind a router and cable-modem. The IP is xxxx.myftp.org. How do
I use WOL to start this machine? Thanks

Christian
--
----------------------------------------------------
AMD Athlon 1300 CPU
512 MB 133 SD-RAM (2*256)
Geforce2 MX/MX 64 MB
Asus A7V-E KT133 motherboard
100 (60+40) GB IBM IDE 60GXP 7200 RPM Deskstar HD
Liteon CD-writer 16/10/40 IDE
Aopen DVD 12x/40x
---------------------------------------------------
 
Ensure that your NIC and motherboard are WOL capable, and that the
appropriate cable is installed, if it's not an onboard NIC. If so, enable
it in the BIOS settings
Val
--
Bringing you BeadWizard Design Software
www.beadwizard.com
***************************
Practice safe eating -- always use condiments.
***************************

Have a PC behind a router and cable-modem. The IP is xxxx.myftp.org. How do
I use WOL to start this machine? Thanks

Christian
--
----------------------------------------------------
AMD Athlon 1300 CPU
512 MB 133 SD-RAM (2*256)
Geforce2 MX/MX 64 MB
Asus A7V-E KT133 motherboard
100 (60+40) GB IBM IDE 60GXP 7200 RPM Deskstar HD
Liteon CD-writer 16/10/40 IDE
Aopen DVD 12x/40x
---------------------------------------------------
 
You turn it on in the bios and it wakes(turns on the computer) when it
receives either a network signal or when the phone/modem rings.
 
Back
Top