Drive Letters Change Unexpectedly When You Install Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;326683&Product=winxp
You'll have to physically disconnect whatever drive is shown as the current C: drive,
perform a "clean install", then reconnect that drive.
The Windows XP CD is bootable and contains all the tools necessary
to partition and format your drive. Follow this procedure and allow
Windows XP to partition and format your drive:
NOTE: It would be best to physically disconnect all your peripheral hardware
devices, except the monitor, mouse and keyboard, before installing XP.
NOTE: If you have an internal Zip Drive installed, physically disconnect the
EIDE and power cable to it before proceeding, otherwise your main
hard drive may not be assigned the customary C: drive letter.
After installing Windows XP, you may then reconnect it.
1. Open your BIOS and set your "CD Drive as the first bootable device".
===> Accessing Motherboard BIOS
===>
http://www.michaelstevenstech.com/bios_manufacturer.htm
2. Insert your Windows XP CD in the CD Drive and reboot your computer.
3. You'll see a message to boot to the CD....follow the instructions.
4. The setup menu will appear and you should elect to delete all the existing
Windows partitions, then create a new partition, then format the primary
partition (preferably NTFS) and proceed to install Windows XP.
5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html
[Courtesy of Michael Stevens, MS-MVP]
6. ==> Immediately after installing Windows XP, turn on XP's Firewall.
==>
http://www.microsoft.com/security/protect/
7. After Windows XP is installed, visit the Windows Update website
and download the available "Critical Updates".
8. After installing the critical updates, be sure and visit the support website
of the manufacturer of the computer to download and install any
available Windows XP compatible drivers, such as video adapter
and audio drivers.
9. If you happen to run into any installation difficulties, use the following resources:
How to Troubleshoot Windows XP Problems During Installation
http://support.microsoft.com/default.aspx?scid=kb;EN-US;310064
Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm
[Courtesy of MS-MVP Kelly Theriot]
Note: If you are unable to activate Windows XP again via the internet,
then select the option to "activate by telephone".
--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User
Be Smart! Protect your PC!
http://www.microsoft.com/security/protect/
-------------------------------------------------------------------------------------------------------------
| Hiya, I installed Windows XP on my new hard drive and strangely it's decided on its own drive letters. I
have two HDDs, my master has Windows installed on it and jumper settings are correct, and my slave HDD's
jumpers are also correct. I can change that drive letter through admin tools > computer management > storage
Disk Management, but it says I can't change the drive letter of the master drive (which has Windows XP on
it) because it contains the system volume. I've tried reinstalling / repairing the windows install but no
dice. I've tried it through command prompt > diskpart, no dice. It's a stupid little thing, but it's driving
me crazy that my main hard drive is letter F!
|
| Any way anyone can help me out here? I have Windows XP Home, thanks much in advance!
