Hooking up router/no boot up

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Computer has Xp Home and was self made by a friend a long time ago but when I
got this d-link router, model WBR-1310 ver. D1. The computer won't boot. It
will boot only in safe mode and I have to do system restore to get computer
to boot again. Router settings are at default. The computer isn't booting off
the network, it is booting from harddrive so Bios are fine. This may be the
wrong area for this question but even some of my friends are unable to figure
this out. Any other suggestions would be great.
 
Eternal Turtle said:
Computer has Xp Home and was self made by a friend a long time ago
but when I got this d-link router, model WBR-1310 ver. D1. The
computer won't boot. It will boot only in safe mode and I have to do
system restore to get computer to boot again. Router settings are at
default. The computer isn't booting off the network, it is booting
from harddrive so Bios are fine. This may be the wrong area for this
question but even some of my friends are unable to figure this out.
Any other suggestions would be great.
Click to expand...

How are you connecting *to* the router? Ethernet? USB?
Also, if you're getting error messages (during boot, or in the event logs),
post them.
 
Lanwench said:
How are you connecting *to* the router? Ethernet? USB?
Also, if you're getting error messages (during boot, or in the event logs),
post them.


ethernet and no error messages, stays at windows xp loading screen
Click to expand...
 

And when you boot up without the Ethernet cable plugged in, is it fine? When
you go into safe mode, what do you see in the event logs?
 
Back
Top