Home Network

[Guest]

I have connected both computers to a router and each has access to the
internet with no problem. My slave computer shows up on my host, but the
host does not show up on the slave computer. Also, I am unable to share the
printer from the slave computer. I ran Setup Wizzard on both. Do I need to
use the XP disk on the slave computer even though the Setup Wizzard was run?

 

[Robert L [MS-MVP]]

First, make sure no firewall blocks the file and printer sharing. also you have enabled sharing the host and you net view from client to the host. this may help,

Troubleshooting is not accessible error
Troubleshooting "... is not accessible" error step by step. When try to access
a remote computer, you may receive the following error messages: ...
www.howtonetworking.com/Troubleshooting/notaccessibale0.htm

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
I have connected both computers to a router and each has access to the
internet with no problem. My slave computer shows up on my host, but the
host does not show up on the slave computer. Also, I am unable to share the
printer from the slave computer. I ran Setup Wizzard on both. Do I need to
use the XP disk on the slave computer even though the Setup Wizzard was run?